In order to improve the control accuracy of the temperature control system for the plastic extruder and better achieve optimal control between the parameter settings and the temperature of the plastic extruder, an intelligent algorithm combining improved simulated annealing (ISA) algorithm and particle swarm optimization (PSO) algorithm is studied. This algorithm is utilized to achieve automatic optimization of the PID parameters of the temperature control system, thereby making parameter optimization faster and more accurate. The benchmark test function was employed to evaluate the performance of the improved PSO (IPSO) algorithm, genetic algorithm improved PSO (GA‐PSO), simulated annealing PSO (SA‐PSO), and ISA‐PSO. The results demonstrated that the ISA‐PSO algorithm possesses stronger global optimization capability and superior convergence performance. Finally, MATLAB simulation and experimental test results indicate that, compared to the control effects of IPSO, GA‐PSO, and SA‐PSO, the PID controller optimized by the ISA‐PSO algorithm exhibits better accuracy and robustness. The temperature fluctuation of the charging barrel is significantly reduced, with the maximum value of the absolute temperature deviation being only 0.6°C and the average value of the absolute temperature deviation being approximately 0.35°C. This effectively enhances the accuracy and robustness of the temperature control system for the plastic extruder.
28 January 2025 in Journal of Electrical and Computer Engineering
Kitchen anaerobic wastewater contains a high concentration of insoluble organic matter, and the degradation of organic matter in the wastewater is the key to treating kitchen anaerobic wastewater. The Fenton oxidation process is used to treat kitchen anaerobic wastewater, and the effects of H 2 O 2 dosage, Fe 2+ dosage, reaction time and pH value on chemical oxygen demand (COD) degradation efficiency are explored. The improved particle swarm optimization (IPSO) algorithm is used to optimize the back propagation (BP) neural network, and a prediction model of COD degradation is established based on IPSO‐BP neural network. H 2 O 2 dosage, Fe 2+ dosage, reaction time and pH value are selected as the main influencing factors of the COD degradation, and 30 groups of experimental data are selected to train the IPSO‐BP neural network. The results predicted by the trained IPSO‐BP neural network on 10 groups of test data are compared with the actual values, and the results predicted by BP model and genetic algorithm‐BP (GA‐BP) model are compared. The IPSO‐BP model has the highest fitting accuracy. The root mean square error (RMSE), RMSE coefficient of variation (CV‐RMSE), and coefficient of determination ( R2 ) were used to evaluate the prediction performance of the model. The indicators of the IPSO‐BP model were significantly better than those of the GA‐BP model and the BP model, indicating that IPSO‐BP model had better generalization ability and could predict COD concentration more effectively. The optimal conditions for Fenton oxidation obtained from IPSO‐BP model are as follows: the dosage of H 2 O 2 is 2000 mg/L, the dosage of Fe 2+ is 1200 mg/L, the pH value is 2.8, the reaction time is 75 min, and the COD removal rate is 80.125%, which is consistent with the experimental results. Through gas chromatography‐mass spectrometry (GC‐MS) analysis, most organic compounds in kitchen anaerobic wastewater are oxidized and decomposed, indicating that the IPSO‐BP model has good predictive quality.
28 March 2023 in Journal of Electrical and Computer Engineering
In order to solve the problem of low image identification accuracy of Trichagalma glabrosa insect gall pests in a complex natural environment, an image identification method of Trichagalma glabrosa insect gall pests based on YOLOv5s was designed and introduced in this study. The original images were preprocessed with the grayscale maximum method and different gradients of noise, which reduced the color difference interference with complex backgrounds and improved the image identification rate. A total of 6090 images of insect gall pests under opposite light, back light, and complex backgrounds were constructed, which were divided into a training set and a test set with a ratio of 7:3. The results showed that the precision, recall, and mean average precision of YOLOv5s were 94.35, 95.42, and 95.8, respectively. YOLOv5s, YOLOv4, and Faster-RCNN were compared and analyzed under the same test conditions. The identification accuracy of YOLOv5s was higher than that of YOLOv4 and Faster-RCNN, and its model size was only 13.8MB. It was considered that the designed YOLOv5s method could help accurately and quickly identify Trichagalma glabrosa insect gall pests with high identification accuracy and a small model capacity, which was more conducive to the migration application of the model, and provide a new method for the rapid identification of Trichagalma glabrosa insect gall pests in a complex natural environment.
1 January 2024 in Modelling and Simulation in Engineering
In the health monitoring work of long‐span concrete‐filled steel tube tied arch bridges, finite element models have been commonly employed to indicate the practical stress state, and providing accurate data in real time and efficiently has been confirmed as the weakness of the finite element model. The prediction model is built in accordance with the general regression neural network (GRNN), and the parameters of the GRNN model are optimized using particle swarm optimization (PSO) to build the PSO‐GRNN prediction model, with the aim of modifying the finite element model. A finite element analysis model is built using the Qiuhuli flying‐swallow‐typed tied arch bridge to verify the effect of the PSO‐GRNN prediction model. The model test data are acquired using the horizontal thrust of arch foot, the bulk weight of main beam, and the tension of tied rod as the input variables and using the stress of main arch rib steel pipe, the stress of main arch concrete, and the displacement of mid span as the output variables. As revealed by the results, the average prediction accuracy of the PSO‐GRNN model constructed in this article is 96.706%, 98.531%, and 99.634%, respectively, which are 1.980%, 1.706%, and 0.40% higher than the back propagation (BP) neural network model and 2.262%, 1.632%, and 0.387% higher than the GRNN model. The mean absolute percent error (MAPE), root mean square error (RMSE), coefficient of determination (R2), and Nash‐Sutcliffe efficiency (NSE) coefficient were used to evaluate the prediction performance of the model. The PSO‐GRNN model has the highest fitting accuracy, indicating that the established PSO‐GRNN prediction model can more effectively predict the relevant parameters of concrete‐filled steel tube tied arch bridges and has high accuracy.