The addition of nanoparticles to liquid media can improve thermomechanical properties of dispersants. This ability gives rise to the development of multiple applications of nanofluids (NF) in branches so different as electronic and photonic devices or cosmetic industry. Logically, these applications require a good control of heat transfer and flow properties. Moreover, if we consider the necessity to optimize industrial processes in which NF take part, it is necessary to obtain possible relationships between both physical mechanisms. Specifically, in this work, a study about thermal conductivity and rheological behavior of fumed silica suspensions in polypropylene glycol (PPG400) and polyethylene glycol (PEG200) was performed. The study of these two suspensions is interesting because the flow behaviors are very dissimilar (while the fumed silica in PEG200 suspension is viscoplastic, the fumed silica in PPG400 suspension shows shear-thickening behavior between two shear-thinning regions), despite the addition of fumed silica producing similar enhancement of the relative thermal conductivity in both liquid phases. The more outstanding contribution of this work lies in the combination of rheological and conductivity measurements to deepen in the understanding of the heat transfer phenomenon in NF. The combination of rheological together with thermal conductivity measurements have permitted establishing the mechanisms of liquid layering and aggregate formation as the more relevant in the heat transfer of these silica fumed suspensions.

ZnO nanoparticles were synthesized using lemon juice and zinc nitrate (1:1) through the green method. The structure of the biosynthesized ZnO nanoparticles was analyzed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). The morphology and the size of ZnO nanoparticles were elucidated by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The powder was highly dispersed and irregularly shaped and the size of the nanoparticles ranged from 28 to 270 nm, depending on the shape of the particles. Thermal conductivity of the biosynthesized ZnO PG/W mixture 40:60 (v/v) nanofluids was measured within the temperature range of 20–70 °C. Experimental results revealed a linear increase in thermal conductivity with the rise of temperature and volume fraction. The enhancement of this parameter with temperature was probably due to the different shapes of the former agglomerates. They were broken by the thermal energy in aggregates of different forms. A correlation of these structures with temperature was established. Finally, an empirical model was developed for predicting thermal conductivity with particle volume fraction and temperature.

Virgin coconut oil (VCO) is an edible vegetable oil that is eco-friendly, biodegradable, and sustainable, with high thermal and chemical stability as a phase change material (PCM). In this work, VCO filled with fumed silica A200 nanoparticles was tested as a cutting fluid in drilling processes. Silica concentrations ranging from 1 to 4 vol% were analyzed. Thermal properties were evaluated by differential scanning calorimetry (DSC) and thermal conductivity measurements at different temperatures and concentrations. Thermal conductivity showed an enhancement with the addition of silica powder and reduced with increasing temperature. Based on thermal and flow properties, VCO-3A200 was found to be the optimal concentration. The thermal images of this nanofluid taken after 60 s of drilling exhibited a reduction of 12 °C with respect to the dry process. The friction coefficient versus shear rate was also measured. With 8% VCO, a reduction in the friction coefficient of 8% compared to the dry test was achieved. The addition of 3 vol% of silica to the base oil reduced the friction coefficient by 16% compared to the dry test. The use of fumed silica dispersed in VCO has proven to be a sustainable, recyclable, and environmentally friendly refrigerant and lubricant cutting fluid.