An innovative inert anode current collector is successfully developed and used in solid oxide membrane (SOM) electrolysis experiments. In these experiments, an oxygen-ion-conducting yttria-stabilized zirconia (YSZ) membrane separates a liquid silver anode from a molten fluoride flux containing magnesium oxide. During electrolysis at 1423 K, magnesium cations in the flux are reduced at a stainless steel cathode and removed in the vapor phase employing argon bubbling and condensed in a separate chamber. Meanwhile, oxygen anions are transported out of the flux through the YSZ membrane to the liquid silver anode where they are oxidized producing oxygen gas. The inert anode current collector is immersed in the liquid silver anode. The current collector employs a sintered strontium-doped lanthanum manganite (La0.8Sr0.2MnO3-δ or LSM) bar, an Inconel alloy 601 rod, and a liquid silver contact in between. During the SOM electrolysis experiments, the current collector exhibited excellent electrical, thermal, mechanical, and chemical stabilities in oxygen as well as the liquid silver environment.
Low-cost clean primary production of magnesium metal is important for its use in many applications, from light-weight structural components to energy technologies. This work describes new experiments and cost and emissions analysis for a magnesium metal production process. The process combines molten salt electrolysis of MgO using MgF₂-CaF₂ electrolyte and a reactive liquid tin cathode, with gravity-driven multiple effect thermal system (G-METS) distillation to separate out the magnesium product, and re-use of the tin. Electrolysis experiments with carbon anodes showed current yield above 90%, while a yttria-stabilized zirconia solid oxide membrane (SOM) anode experiment showed 84% current yield. G-METS distillation is an important component of the envisioned process. It can potentially lower costs and energy use considerably compared with conventional magnesium distillation. Techno-economic analysis including detailed mass and energy balances shows that this electrolyte composition could lower costs by utilizing CaO, which is the primary impurity in MgO, as the Hall-Héroult process uses the sodium impurity in alumina. Analysis options include: raw material types (magnesite rock vs. brine or seawater), drying and calcining using electricity vs. natural gas, and carbon vs. SOM anode type. Using SOM inert anodes results in a cost premium around 10%–15%, mostly due to higher electrical energy usage resulting from membrane resistance, and reduces GHG emissions by approximately 1 kg CO₂/kg Mg product. Capital and operating cost estimates, and cradle to gate greenhouse gas (GHG) emissions analysis under several raw material and process technology scenarios, show comparable costs and emissions to those of aluminum production.
1 January 2013 in Journal of Mining and Metallurgy, Section B: Metallurgy
The Solid Oxide Membrane (SOM) process for magnesium production involves the direct electrolysis of magnesium oxide for energy efficient and low-carbon magnesium production. In the SOM process, magnesium oxide is dissolved in a molten oxy-fluoride flux. An oxygen-ion-conducting SOM tube, made from yttria stabilized zirconia (YSZ), is submerged in the flux. The operating life of the electrolytic cell can be improved by understanding degradation processes in the YSZ, and one way the YSZ degrades is by yttria diffusion out of the YSZ. By adding small amounts of YF3 to the flux, yttria diffusion can be controlled. The diffusion of yttria into the flux was quantified by determining the yttria concentration profile as a function of immersion time in the flux and distance from the flux-YSZ interface. Yttria concentrations were determined using x-ray spectroscopy. The diffusion process was modeled using a numerical approach with an analytic solution to Fick?s second law. These modeling and experimental methods allowed for the determination of the optimum YF3 concentration in the flux to minimize yttria diffusion and improve membrane stability. Furthermore, the effects of common impurities in magnesium ores, such as calcium oxide, silica, and sodium oxide/sodium peroxide, on YSZ stability are being investigated.