Three-dimensionally ordered photonic crystals were grown using self-assembly technique from Rhodamine-B dye doped polystyrene micro-spheres resulting in a stop band at 611 nm overlapping the emission spectrum of the dye. When excited at a wavelength away from the stop band, using a frequency-doubled Nd:YAG laser, the crystal showed angle-dependent suppression of spontaneous emission of the dye in the wavelength range of the photonic stop band and enhancement at the band edge, in reflection and transmission geometries. Spectral narrowing, a sharp threshold and a highly directional emission, all indicative of stimulated emission, were observed from the active photonic crystal matrix.
We study a photonic crystal (PhC) heterostructure cavity consisting of gain medium in a three-dimensional (3D) PhC sandwiched between two identical passive multilayers. For this structure, based on Korringa-Kohn-Rostoker method, we observe a decrease in the lasing threshold of two orders of magnitude, as compared with a stand-alone 3D PhC. We attribute this remarkable decrease in threshold gain to the overlap of the defect cavity mode with the reduced group velocity region of the PhC’s dispersion, and the associated enhancement in the distributed feedback from the ordered layers of the PhC. The obtained results show the potency for designing PhC-based, compact on-chip lasers with ultra-low thresholds.
The linear absorption in erbium-doped fiber (EDF) contributes to its excellent role in EDF amplifiers and lasers. A nonlinear optical contribution in the absorption of EDF is responsible for optical bistable action when it is present in a laser cavity. To quantify this effect, the variation of absorption coefficient is measured at different signal powers at multiple wavelengths in the C-band for different EDF lengths, and saturable absorption parameters such as the saturation power are extracted. Then the modification in the output characteristics of EDF ring laser with change in fiber length and in the presence of self-induced saturable absorption effect within the gain medium, which leads to optical bistability, is measured. By comparing the measured parameters obtained from saturable absorption in EDF and optical bistability in EDF ring laser, we estimated the length of the gain medium which acts as the saturable absorber inside the cavity of the laser. This is useful in constructing bistable lasers with optimized conditions. The temporal evolution of cavity loss and gain with the intra-cavity power and up- and down-thresholds helps in understanding why the down-threshold will be lesser than the up-threshold in bistable laser systems.
Spectral distribution of emission was measured in a large angular range (8 deg to 180 deg) around a self-assembled photonic crystal synthesized from colloids of Rhodamine-B dye-doped polystyrene. Its comparison with the emission from the same dye-doped colloids in a liquid suspension provides a better understanding of the anisotropic propagation of light within the structure due to its pseudo-gap properties. The spontaneous emission is suppressed by 40% in the presence of the stop band over a large bandwidth () of the first-order bandgap in the direction, due to the appropriate choice of the colloidal diameter. Spectral shifts in the spontaneous emission spectrum occur with the variation in the detection angle. The inevitable disorder in the self-assembled crystals and the resultant effect on emission was modeled by comparing the experimentally obtained reflection spectrum with the band structure calculated using the Korringa–Kohn–Rostoker method to exclude finite-size effects. Reflection and transmission are complementary because of the absence of strong absorptive effects. The extent of redistribution in the emission from a photonic crystalline environment with respect to a homogeneous emitter is significant in the spectral and spatial domains.