In recent years, the frequent outbreaks of cyanobacterial blooms have caused severe water pollution in many rivers and lakes at home and abroad, endangering drinking water safety and human health. How to remove cyanobacteria from water bodies safely, quickly, and economically has attracted the attention of many scientists. Currently, the typical treatment methods for algae in algae-bearing water bodies are physical, biological, and chemical methods. The physical method of algae removal is for both the symptoms and the root cause, but the workload is extensive, with high input costs, and should not be used on a large scale. The biological method is low-cost, but the removal efficiency is slow and unsuitable for the treatment of sudden water bloom. The chemical method can kill algae quickly, but it is easy to cause secondary pollution. These methods are relatively independent of each other, so the choice of a practical combination of technologies is essential for algal bloom removal and eutrophication management. This paper reviews the current application status and advantages and disadvantages of algae removal technologies at home and abroad; classifies them from physical, chemical, biological, and combined methods; and provides an outlook on the future development direction of algae removal technologies.

To investigate the treatment effect of algae biosorbent on heavy metal wastewater, in this paper, the adsorption effect of M. aeruginosa powder on heavy metal ions copper, cadmium and nickel was investigated using the uniform experimental method, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and TG-DSC comprehensive thermal analysis. The experimental results showed that the initial concentration of copper ion solution was 25 mg/L, the temperature was 30 °C, the pH value was 8 and the adsorption time was 5 h, which was the best condition for the removal of copper ions by algae powder adsorption, and the removal rate was 83.24%. The initial concentration of cadmium ion solution was 5 mg/L, the temperature was 35 °C, the pH value was 8 and the adsorption time was 4 h, which was the best condition for the adsorption of cadmium ion by algae powder, and the removal rate was 92.00%. The initial nickel ion solution concentration of 15 mg/L, temperature of 35 °C, pH value of 7 and adsorption time of 1 h were the best conditions for the adsorption of nickel ions by algae powder, and the removal rate was 88.67%. The spatial structure of algae powder changed obviously before and after adsorbing heavy metals. The functional groups such as amino and phosphate groups on the cell wall of M. aeruginosa enhanced the adsorption effect of heavy metal ions copper, cadmium and nickel. Additionally, M. aeruginosa adsorption of heavy metal ions copper, cadmium, nickel is an exothermic process. The above experiments show that M. aeruginosa can be used as a biological adsorbent to remove heavy metals, which lays a theoretical foundation for the subsequent treatment of heavy metal pollution by algae.

The aim of this paper was to effectively reduce environmental pollution and further improve the enzymatic hydrolysis rate of corn straw. Thus, a pretreatment method for activating cellulose by using ionic liquid to treat metal ion solution was developed. By investigating the effects of the three factors of substrate mass fraction, reaction temperature, and reaction time, and the interaction between the factors on the pretreatment effect, the response surface design method was used to optimize the conditions of ionic liquid (1-butyl-3-methylimidazolium chloride) treatment of corn straw after activation, and the physicochemical structure and enzymatic hydrolysis efficiency before and after treatment were compared and analyzed. The experimental results showed that the yield of reducing sugar was increased by 157.85% and 150.41%, respectively, compared with the untreated corn straw. The analysis of chemical composition and structure showed that the cellulose content of the material increased significantly by 68.11% and 60.54%, respectively, after ionic liquid treatment. The results of the scanning electron microscope (SEM) observation and X-ray diffraction (XRD) showed that the relative crystallinity of the material decreased after ionic liquid treatment, which was more conducive to the enzymatic hydrolysis of cellulose.