A series of new biobased polyamide 10T-co-56 were synthesized with various comonomer compositions by a one-pot polycondensation reaction, and their structures and the crystalline and melting behavior were investigated using 1H NMR spectroscopy, wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively. The copolyamide exhibited a eutectic melting point at 60 mol% of 56, with melting points decreasing linearly from 310 °C to a minimum of 221 °C, and the melting enthalpies exhibited a similar tendency. WAXD was used to further characterize the crystalline and eutectic behavior of copolyamides. Moreover, the influence of the composition and comonomer sequences of copolyamides on their modulus, glass transition, thermal stability and mechanical properties were investigated.
7 September 2013 in Applied Biochemistry and Biotechnology
Poly (decamethylene terephthalamide) (PA10T) is a kind of engineering plastics with high strength and high modulus, but one of its disadvantages is its low elongation at break. In order to improve the flexibility of PA10T, one aliphatic comonomer with a long alkyl chain is introduced to the molecular chain of PA10T. Then long chain semiaromatic copolyamides 10T/1014 were synthesized with different contents of 1014 units by polycondensation reaction of 1,10-diaminodecane, terephthalic acid and 1,12-dodecanedicarboxylic acid in deionized water. The intrinsic viscosities of the resultant polyamides ranged from 0.90 to 1.03 dL/g were obtained. The chemical and crystal structures of the copolymers were characterized by FTIR, 1H-NMR and WAXD. These copolyamides exhibited outstanding thermal properties with melting points range of 306–295 °C and degradation temperatures range of 479–472 °C at maximum degradation rate, and also have a wider processing window than PA10T. The tensile strength of PA10T/1014 copolymers decreased gradually from 80.02 to 72.95 MPa as the content of 1014 units increasing from 5 to 20 mol %, while the elongation at break increased significantly from 57 to 150%. The moisture content of 10T/1014 copolyamides decreased with increasing the 1014 unit contents. It suggests that 10T/1014 copolyamides could be a kind of promising heat-resistant engineering thermoplastic in the future applications.