This article deals with the derivation of the temperature response of the finite thickness wall, which is heated by heat flow, as a possibility to measure the local values of the heat transfer coefficient with a very high spatial resolution. In addition to its own experimental measurement technique, it is also possible to use this derivation to describe the gradual heating of the wall while using the temperature oscillation (TOIRT) method for the heat transfer measurement. The system of the partial differential equations and the boundary and initial conditions is solved by a transformation into Laplace's space, where the task is easier to solve. At the end of the article, the results of the analytical solution are compared with a numerical solution of this problem.
This work deals with the application of the temperature oscillation method to measure local values of the heat transfer coefficient in laminar flow in a straight horizontal pipe and in a pipe with a bend. This method, applied here for the first time in such experimental conditions, uses a time-varying heat flux as a boundary condition, which is a condition of the third kind. Since an analytical solution for such conditions could not be identified in the existing literature, a numerical study of this problem is applied here. Experimental data for a straight horizontal pipe confirm the numerical results within a reasonable level of error. Experimental measurements on a straight horizontal tube are consistent with predicted results in the literature for both total and local heat transfer coefficient values. The measurements on bent tubes show a very significant influence on the local values compared to the straight tube and in the overall values this change appears as an increase in the heat transfer coefficient.