Replacing conventional aggregate with steel slag waste can boost the microwave absorption properties of asphalt mixtures and reduce pollution to protect the environment. In order to achieve the best healing in steel slag asphalt mixture, the optimum particle size and content of steel slag are essential. For this purpose, a high-efficiency algorithm for the random growth and placement of convex polyhedron aggregate is proposed in this paper. The limestone aggregate is replaced with an equal volume of steel slag, and a three-dimensional mesoscale random model of steel slag asphalt mixture is developed. The process of microwave heating is simulated by FEM. The numerical simulations are compared with the reported experimental data, which proves that the model is reliable (R2 = 99.40%). Both the volume average temperature and the uniformity of temperature distribution indicate that the steel slag replacement rate of 60% at 4.75–9.5 mm and 60% at 9.5–13.2 mm is optimal, among which the heat transfer of 4.75–9.5 mm steel slag is more uniform, and the temperature gradient is lower. Steel slag can dramatically increase the heating rate of an asphalt mixture, and the peak of the temperature gradient is around the boundary of steel slag. The reflection properties of steel slag may be related to the dielectric constant, permeability, and particle size. Excess steel slag will cause overheating in most zones of the specimen and will also depress the absorption efficiency of microwaves. The coefficient of variance for spherical (0.36) and polyhedral (0.32) aggregate specimen temperatures indicates that the aggregate’s shape has a negligible effect on the heat transfer of asphalt mixtures.
Aqueduct is a kind of cross bridge building which can cross the channel, depressions, roads and railways .In the paper, based on the aqueduct design, aqueduct model making, aqueduct structure calculation and static load experiment, the aqueduct model is made to solve the problem of analysis of the internal force of the cable-stayed aqueduct structure and obtained the changing value of model deformation with the increase of load. Experiment results show that the boundary load of elastic deformation and plastic deformation of model is 30kg, and the ultimate load is 60kg.Using structural solver to model and check the most likely failure point of aqueduct with 52kg load, and shows that It can meet the design requirements, and verify the feasibility of the model design.