Nikola Obradović

Mr. Nikola Obradović

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 February 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
NONikola Obradović
Nikola Obradović
SJSanja Jocković
Sanja Jocković
MVMirjana Vukicevic
Mirjana Vukicevic
This paper investigates the possibility of the application of the HArdening State Parameter (HASP) constitutive model for numerical modelling of overconsolidated soft clay under embankment loading. The HASP constitutive model is a critical state soil model with a combined hardening rule that uses a state parameter to determine the dilatancy of overconsolidated clay. The model overcomes some shortcomings of the Modified Cam Clay (MCC) model in the prediction of overconsolidated clay’s behavior, while preserving the simplicity and the same set of five parameters. The HASP model was implemented in finite element software. In order to verify the applicability of the model in predicting the behavior of soft overconsolidated clay due to embankment loading, two examples reported in the literature are analyzed. The numerical predictions of the HASP model are compared with the field measurements of ground settlements and pore water pressures, and with the MCC model’s predictions. The results indicate that the HASP model predicts the development of the settlements of the overconsolidated soft clay deposits with a high accuracy from an engineering point of view. There are certain deviations from the field measurements in predicting the pore pressure development, which is often observed for other models as well. For the embankment settlement assessment, as important serviceability issue, the HASP model has an advantage over more complex models that require a large number of parameters. Since the parameters of the HASP model are obtained from standard laboratory tests, it can be easily applied for routine geotechnical analyses.

1 January 2018 in Journal of the Croatian Association of Civil Engineers
Verified
Journal Article
Open access
PDF file
MVMirjana Vukicevic
Mirjana Vukicevic
Miloš MarjanovićMiloš Marjanović
Miloš Marjanović
VPVeljko Pujević
Veljko Pujević
NONikola Obradović
Nikola Obradović

1 January 2026 in Građevinski materijali i konstrukcije
Verified
Journal Article
Open access
PDF file
NONikola Obradović
Nikola Obradović
SJSanja Jocković
Sanja Jocković
A numerical analysis was performed to investigate the bearing capacity and settlement behaviour of shallow foundations on overconsolidated clays. Finite element analyses were conducted in PLAXIS 2D using two constitutive soil models: the Modified Cam Clay and the Hardening State Parameter (HASP) model. The HASP model, implemented as a user-defined constitutive formulation, introduces state-dependent hardening within the critical state framework to represent the stress-strain behaviour of overconsolidated clays. The study reproduced field load tests on two shallow footings (A and B) at the Bothkennar research site, supported by comprehensive measurements of settlements and pore-water pressures. All soil parameters were adopted directly from published laboratory data, without further calibration. The analyses focused on the load-displacement response, time-dependent settlements under sustained loading, and the development and dissipation of excess pore-water pressures. The HASP model provided a realistic prediction of the measured field behaviour, showing good agreement with observations and demonstrating its capability to capture the coupled hydro-mechanical response of overconsolidated clays.

21 July 2026
Verified
Book Chapter
Closed access
MRMilena Raković
Milena Raković
NONikola Obradović
Nikola Obradović
VPVeljko Pujević
Veljko Pujević
SJSanja D. Jocković
Sanja D. Jocković
UĐUroš Đurić
Uroš Đurić
SMSnežana Maraš-Dragojević
Snežana Maraš-Dragojević

23 September 2026
Verified
Conference Paper
Open access
PDF file
SJSanja Jocković
Sanja Jocković
NONikola Obradović
Nikola Obradović
MĆMladen Ćosić
Mladen Ćosić
NŠNenad Šušić
Nenad Šušić
This paper presents an analysis of consolidation settlement and consolidation time due to the construction of a road embankment on the Kratovska Stena–Lučani section. The study was performed for three representative sections between bridge structures, considering different embankment heights and subsoil improvement options. The analysed cases included no soil replacement, full-width replacement of the soft layer with thicknesses ranging from 1.5 to 2.5 m, and bench-shaped replacement. The results indicate that the applied subsoil improvement measures significantly reduce total settlement and reduce consolidation time. The findings provide a sound basis for selecting a technically and economically optimal engineering solution in practice.

23 September 2026
Verified
Conference Paper
Open access
PDF file
VPVeljko Pujević
Veljko Pujević
NONikola Obradović
Nikola Obradović
Miloš MarjanovićMiloš Marjanović
Miloš Marjanović
SJSanja Jocković
Sanja Jocković
NTNikola Tošić
Nikola Tošić
The Winkler model is the most widely used approach for the structural design of industrial floor slabs because of its simplicity and implementation in commercial software. However, selecting a representative modulus of subgrade reaction remains a major source of uncertainty. Conventional methods usually derive this parameter from predicted settlements or empirical correlations, although the primary objective of structural analysis is the determination of bending moments. This paper proposes a calibration-based methodology in which the modulus of subgrade reaction is treated as an equivalent numerical parameter rather than an intrinsic soil property. The representative value is obtained by calibrating the Winkler model against a continuum finite element model using bending moments as the calibration criterion. The methodology is illustrated through the redesign of an industrial floor slab and provides a practical and reliable basis for structural design.