Low-cost TiB whiskers reinforced titanium matrix composite (TMCs) was fabricated with enhanced mechanical performances usingin situtechnologies and hot working. Morphologies observation indicates that needle-like TiB whiskers with a hexagonal transverse section grow along the [010] direction due to B27 crystal structure and its growth mechanism. Mechanical properties tests show that the mechanical behavior of the TiB whiskers reinforced TMCs is dependent on the deformation amplitudes applied in hot-working. The improvement in yield strength by hot-working is attributed to the TiB whiskers realignment and the refinement of microstructure. Models are constructed to evaluate the realignment of TiB whisker during deformation and the increase in yield strength of the composite at elevated temperatures. These models clarify the alignment effect of TiB whiskers under various deformation amplitudes applied in hot-workings and reveals the yield strength dependence on TiB whiskers orientation.

Lacking osseointegration and peri-implantitis induced by bacterial infiltration are the pivotal issues for the long-term clinical success of implants. In order to improve the bioactivity and antibacterial properties of implant materials, volcano-shaped microporous TiO₂ coatings doped with Zinc (Zn) were fabricated via a micro-arc oxidation (MAO) method on pure titanium (Ti). The microstructure, morphology, and chemical composition of the Zn-doped coatings were systematically studied. In cell culture tests, the formed coatings promoted the adhesion and proliferation of bone mesenchymal stem cells (BMSCs), exhibiting good biocompatibility. The antibacterial experiments revealed that Zn-TiO₂ coatings possess excellent antibacterial properties against Staphylococcus aureus (S. aureus) and Porphyromonas gingivalis (P. gingivalis).