A physico‐chemical elucidation of the first photographic technology that allowed manifold reproduction is presented. An etched daguerreotype manufactured around 1840 in Vienna, preserved by the Technisches Museum Wien, served as a case study. Surface analysis showed that the photographic process involved the formation of colloidal Ag nanoparticles with sizes of 30–120 nm with shell layers consisting of Ag2O, Ag2S, and some AgCl. This breakthrough photographic technique provided a hitherto unachieved high sensitivity because of various halogenide mixtures without the use of Hg. The image development consisted of the reduction of the Ag halides by H2SO3 created by the hydrolysis of S2Cl2 leading to the formation of Ag nanoparticles adjacent to the Ag nuclei of the latent image. The fixing of the image was performed either by KCN or by Na2S2O3. The investigated plate exhibits etched areas with Ag2O conversion layers and no Cl or S. The gum arabic use for etching preferentially wetted the exposed Ag nanoparticle regions so that unexposed areas could be etched by HNO3.
Conservation interventions on silver tarnish and corrosion layers include mechanical, chemical, and electrolytic techniques. Electrolytic reduction is still disputed among metal conservators. The prevailing conviction with many is that mechanical cleaning methods are more likely to maintain control over the result than electrochemical methods. A survey on this subject undertaken in Germany and Austria suggested that this may be due to the traditional approaches of academic education. An electrolytic pencil was further developed and has been applied on naturally aged silver artefacts of the nineteenth and twentieth centuries. The influence of the electrochemical potential difference between artefact and counter electrode as well as of the tip diaphragm material was evaluated. A minimized material loss and a good controllability of conservation interventions on silver alloys were demonstrated.
The nature printing technique was designed for the electrotyping reproduction of leaves and other natural products. Authentic impressions could be performed by inserting leaves between two lead plates or pressing leaves into the lead plate by a press. The impression obtained in the soft lead plate could then be further reproduced by copper electroplating. Electrochemically deposited copper is hard-wearing and therefore very suitable for the production of printing plates. However, depending on the technical implementation and the choice of the materials used, decisive differences in the faithfulness of reproductions of original motifs may occur during the electrochemical deposition. A central topic in electroforming of printing plates is the choice of the conductive layer on the mould. In the present study, it has been shown that graphite powder represents a conductive phase on the siloxane mould superior to silver and copper powder. The grain size of the copper electrodeposit depended on the powder grain size. The copper plate deposited on graphite powder showed the lowest grain size (5–20 µm) and the highest homogeneity of the print background. Hand polishing of the printing plate resulted in a much better faithfulness of the motif details than that of the machine polished version. However, the background of the print derived from the machine polished plate was the most homogeneous. Electrochemical investigation showed that remnants of the silver powder could result in local elements that could enhance corrosion and thus impair the durability of the printing plates. This phenomenon was negligible with the conductive layers consisting of graphite and copper.