Mahmoud M. Awd Allah

Dr. Mahmoud M. Awd Allah

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 June 2024 in Polymers
Verified
Journal Article
Open access
PDF file
HJHarri Junaedi
Harri Junaedi
MEMarwa A. Abd El-Baky
Marwa A. Abd El-Baky
MAMahmoud M. Awd Allah
Mahmoud M. Awd Allah
Tamer SebaeyTamer Sebaey
Tamer Sebaey
The gyroid structure is a bio-inspired structure that was discovered in butterfly wings. The geometric design of the gyroid structure in butterfly wings offers a unique combination of strength and flexibility. This study investigated sandwich panels consisting of a 3D-printed gyroid structure core and carbon fiber-reinforced polymer (CFRP) facing skin. A filament fused fabrication 3D printer machine was used to print the gyroid cores with three different relative densities, namely 10%, 15%, and 20%. Polylactic acid (PLA) was used as the printing material for the gyroid. The gyroid structure was then sandwiched and joined by an epoxy resin between CFRP laminates. Polyurethane foam (PUF) was filled into the gyroid core to fill the cavity on the core for another set of samples. Flexural and compression tests were performed on the samples to investigate the mechanical behavior of the sandwiches. Moreover, the two-parameter Weibull distribution was used to evaluate the results statistically. As a result, the sandwich-specific facing stress and core shear strength from the three-point bending test of the composites increased with the increase in sandwich density. Core density controls the flexural characteristics of the sandwich. Adding PUF improves the deflection at the maximum stress and the sustained load after fracture of the sandwich. Compression strength, modulus, and energy absorbed by gyroid core sandwiches and their specific properties are higher than the PUF-filled gyroid core sandwiches at equal sandwich density.

21 September 2022 in Polymer Composites
Verified
Journal Article
Closed access
HAHassan Alshahrani
Hassan Alshahrani
Tamer SebaeyTamer Sebaey
Tamer Sebaey
MAMahmoud M. Awd Allah
Mahmoud M. Awd Allah
MEMarwa A. Abd El-Baky
Marwa A. Abd El-Baky

29 August 2022 in Polymer Composites
Verified
Journal Article
Closed access
MAMahmoud M. Awd Allah
Mahmoud M. Awd Allah
ASAhmed Shaker
Ahmed Shaker
MHMohamad A. Hassan
Mohamad A. Hassan
MEMarwa A. Abd El-Baky
Marwa A. Abd El-Baky

1 September 2023 in Journal of Inorganic and Organometallic Polymers and Materials
Verified
Journal Article
Closed access
PDF file
WAWalaa Abd-Elaziem
Walaa Abd-Elaziem
Mahmoud KhedrMahmoud Khedr
Mahmoud Khedr
AAAbd-Elrahim Abd-Elaziem
Abd-Elrahim Abd-Elaziem
MAMahmoud M. Awd Allah
Mahmoud M. Awd Allah
AMAhmed A. Mousa
Ahmed A. Mousa
MEMarwa A. Abd El-Baky
Marwa A. Abd El-Baky

2 March 2023 in Polymer Composites
Verified
Journal Article
Closed access
MEMohamed Ibrahim Abd Elaal
Mohamed Ibrahim Abd Elaal
MAMahmoud M. Awd Allah
Mahmoud M. Awd Allah
MEMarwa A. Abd El-Baky
Marwa A. Abd El-Baky

29 September 2022 in Journal of Composite Materials
Verified
Journal Article
Closed access
HAHassan Alshahrani
Hassan Alshahrani
Tamer SebaeyTamer Sebaey
Tamer Sebaey
MAMahmoud M. Awd Allah
Mahmoud M. Awd Allah
MEMarwa A. Abd El-Baky
Marwa A. Abd El-Baky
This paper investigates the crashworthiness performance of square pipes with induced holes. Glass reinforced epoxy (GFRP) specimens were fabricated and tested under quasi-static axial crashing. Four design parameters were chosen, each at three levels, to calculate crashworthiness indicators. The design parameters are the hole diameter (d), the hole position to specimen length ratio (P/L), the number of holes and distribution (n), and crosshead speed (V). Taguchi technique has been adapted to get the optimum crashworthiness parameters. Experiments based on Taguchi’s orthogonal array with 9 experimental runs (L9) were performed. Optimal conditions with the maximum absorbed energy (U) and minimum initial peak force ([ ]) were determined. The main effects, signal to noise ratio (S/N), and analysis of variance (ANOVA) have been investigated. Results indicated that “V” followed by “d” are the highest influencing parameters on the values of “U” with a contribution of 49% and 43%, respectively. The dominant influencing parameter on the values of [ ] is “n” with a contribution of 94%. Finally, confirmation tests were carried out to validate the estimated model with respect to experimental results. The optimum U and [ ] of GFRP square pipes with circular cutouts were compared with those of non-porous specimens.