Physical layer key agreement techniques derive a symmetric cryptographic key from the wireless fading channel between two wireless devices by exploiting channel randomness and reciprocity. Current efforts have focused mainly on the security issue and protocol design of the techniques under passive attack and jamming attack. In this paper, we raise the subject of manipulative attack. The attacker wants the keying devices to actually agree on some valid, but manipulated bits. We discuss the feasibility and different means to launch manipulative attack. Aiming at a practical countermeasure, we further propose PHY-UIR (PHYsical layer key agreement with User Introduced Randomness). Both keying devices generate and use random voltage levels $X = fx[1], x[2]\ldots{x}[N]$ and $Y = fy[1], y[2]\ldots{y}[N]$ to exchange probing frames over reciprocal random fading channels $H = fh[1], h[2]\ldots{h}[N]$ . At receiving end, they multiply the received channel measurements XH and YH with the random sequences Y and X to compose a common keying sequence XYH. With this solution, the attacker can no longer manipulate the keying sequences established at legitimate sides and infer the subsequent key. We analyze the security strength of PHY-UIR and conduct extensive simulations to evaluate it. We also perform proof-of-concept experiments by using software defined radios in a real-world environment. Both simulations and experiments demonstrate the effectiveness of PHY-UIR.
4 August 2023 in IEEE Transactions on Geoscience and Remote Sensing
Airborne passive interferometric microwave sensors (PIMSs) were proposed as a powerful complementary tool for ship detection, especially in low visibility and high sea clutter environments. At present, there is only one algorithm for ship detection by airborne PIMSs, and this algorithm is only based on the “cold” brightness temperature (TB) characteristic of metal ships with wakes in passive interferometric microwave images (PIMIs). Moreover, it has been found that ship wakes always exhibit a “hot” TB characteristic in PIMIs. In this article, an improved algorithm is innovatively proposed for ship detection by airborne PIMSs to improve detection performance, and it is simultaneously based on the “cold” and “hot” TB characteristics of metal ships with wakes. The microwave TB model of metal ships with wakes is established to analyze its TB characteristics. Given the TB model and its characteristics, an improved algorithm is introduced, which comprises five steps: searching targets, improving TB maps, clustering targets, estimating ship headings, and estimating ship trajectories. The improved algorithm can detect ships with a low false-alarm probability (FAR) and accurately estimate ship headings using only a single snapshot and the ship trajectory. The practicability and detection performance of the improved algorithm is verified by airborne experiments using an X-band PIMS. The experimental results demonstrate that the improved algorithm can accurately detect ships, estimate ship headings using only a single snapshot, and estimate ship trajectories. The impact of the algorithm parameters on the detection performance is analyzed and discussed. Moreover, the detection performance of the improved algorithm is analyzed and compared with the performance of the only existing algorithm, and the experimental results indicate that the improved algorithm has a better detection performance with a lower FAR value than the only existing algorithm, as expected.
17 July 2020 in IEEE Transactions on Geoscience and Remote Sensing
In two-dimensional mirrored aperture synthesis (2-D MAS), the rank of the transformation matrix can affect the accuracy of the solved cosine visibilities; therefore, it has an impact on the accuracy of the reconstructed brightness temperature image. In this article, the influence of the rank deficient on the accuracy of the reconstructed brightness temperature image of 2-D MAS is discussed. An analysis of the rank-deficient error is performed by computing its impact on the radiometric accuracy for a reference scene. Two correction methods based on multiple measurements are proposed to correct the rank-deficient error. The simulations and experiments are carried out to demonstrate the effectiveness of the proposed methods.
8 January 2021 in IEEE Transactions on Geoscience and Remote Sensing
The presence of unauthorized radio frequency interference (RFI) sources seriously affects the retrieval of brightness temperature of a synthetic aperture interferometric radiometer (SAIR). Postobservation RFI geolocation is important for improving the RFI situation hereafter and mitigating the impact of the identified RFIs. Previous works have demonstrated the potential of using high-/super-resolution direction-of-arrival (DOA) estimation techniques to achieve accurate localization of RFI sources in SAIR imagery. In this article, a multiple snapshot difference method is proposed to further reduce the RFI source geolocation bias. The covariance matrices of the consecutive snapshots with power changed RFIs are picked out and subtracted to cancel out the background scene. A MUSIC-based DOA algorithm is developed. Numerical simulations validate the theoretical correctness and the practical effectiveness of the proposed method.
12 September 2019 in IEEE Transactions on Mobile Computing
With the rapid and continuous growth of various types of wireless devices in IoT, securing the communications among heterogeneous devices becomes an emerging issue. A physical layer security scheme, called “friendly jamming”, has drawn great attention recently owing to its ability to protect the confidentiality of the communication as well as to enable message authentication and access control for those already employed, unencrypted, weakly encrypted, or resource constrained devices. We notice that in a large number of cases in which friendly jamming are preferable, the transmitting signals to be protected have varying spectrum utilization at symbol level. In this paper, we rebuild secrecy capacity models and re-evaluate the jamming efficiency by taking this micro time scale non-stationary characteristic into consideration. Our reassessments reveal that jamming efficiency is greatly overestimated in the existing literature. The second part of our work further proposes a waveform design on jamming signal as a means to enhance the jamming efficiency. The basic idea is to consider both time and frequency domain structure of the transmitting signal when designing the jamming signal, making both time and frequency bandwidth largely match to each other. We discuss the implementation details for jamming common QAM and PSK modulated signals. Both simulations and proof-of-concept experiments validate the theoretical correctness of our reassessment and practical effectiveness of our method.
28 February 2023 in IEEE Transactions on Geoscience and Remote Sensing
In passive microwave remote sensing of the Earth, compared with real aperture radiometer, synthetic aperture radiometer (ASR) is a very powerful instrument with many advantages. However, the system design is more complex than the real aperture radiometer, and the hardware ideality is often not guaranteed. The nonideal characteristics of the system hardware will bring a variety of errors to the system, which will cause the Fourier transform relationship between the visibility function and the brightness temperature image to no longer be established, thus reducing the quality of microwave brightness temperature image reconstruction by traditional methods. In this article, a new microwave brightness temperature image reconstruction method for ASR by transformer is proposed. This method uses a specially designed transformer structure to extract the spectrum features in the visibility function. This method learns the mapping relationship between the visibility function and the original scene brightness temperature image through the supervised learning method, and learns as much as possible the spectrum information contained in the original scene brightness temperature image. Moreover, when there are missing baselines, this method will supplement the missing observation frequency information, so as to obtain better reconstructed image quality. With the above-mentioned advantages, this method can suppress the Gibbs oscillation, and greatly reduce the sidelobe. Compared with the existing reconstruction methods, whether missing baselines or not, the proposed image reconstruction method by transformer has advantages in image quality. We verify the performance of this brightness temperature image reconstruction method through simulation and experiment.