In order to solve the problem of conventional energy shortages, a non-resonant impact piezoelectric energy capture device using a (polyvinylidene fluoride) piezoelectric film at low frequency is proposed, and related theoretical analysis and experimental studies are conducted. The device has a simple internal structure, is green and easy to miniaturize, and is capable of harvesting energy at low frequencies to supply energy to micro and small electronic devices. First, to verify the feasibility of the device, the structure of the experimental device is modeled and dynamically analyzed. Then the modal, stress–strain, and output voltage of the piezoelectric film are simulated and analyzed using COMSOL Multiphysics simulation software. Finally, the experimental prototype is built according to the model, and the experimental platform is constructed to test the relevant performance. The experimental results show that the output power produced by the capturer varies within a certain range when the capturer is excited externally. With an external excitation force of 30 N, a piezoelectric film bending amplitude of 60°, and a piezoelectric film size of 45 × 80 mm, the resulting output power voltage is 21.69 V, the output current is 0.07 mA, and the output power is 1.5176 mW. This experiment verifies the feasibility of the energy capturer and provides a new idea for powering electronic components.

The large load loss of piezoelectricity pumps leads to fluid energy in the fluid chamber during fluid transportation. In this paper, the output performance of a piezoelectricity pump is improved by changing the structure parameters of the fluid chamber to reduce the fluid load. The mechanism of fluid flow energy loss in the body cavity of hydraulic pumps is simulated and analyzed, and the influence of the dimensions of the inlet and outlet valves and the height of the cavity on fluid energy loss is obtained. The flow rate and pressure of inlet and outlet valves with different cavity heights and different driving frequencies are obtained. The results show that the flow rate and output pressure of the hydraulic pump are optimized when the cavity height is 3 mm, and the inlet and outlet valve diameters are 2.5 mm.

In order to solve the problem of ineffective utilization of waste heat generated by energy consumption in industrial production and life, a low-frequency thermal energy conversion type piezoelectric energy trap is proposed, and relevant theoretical analysis and experimental research are conducted. The device utilizes a piezoelectric film (polyvinylidene fluoride) combined with a shape memory alloy and features a simple green structure that can supply energy to microelectronic devices. First, the structural design and working principle of the device are analyzed and the dynamics model is built. Second, COMSOL Multiphysics simulation software (Version 5.6) is used to analyze and calculate the output voltage of shape memory alloy shrinkage, piezoelectric film shape and parameters. Finally, the experimental prototype is machined and fabricated by the fine engraving machine, and the experimental platform is built for relevant performance tests. The experimental results show that when the temperature is 100 °C, the maximum strain of shape memory alloy with 1 mm diameter is 0.148 mm. When the shape of the piezoelectric film is triangular, the length of the bottom edge is equal to the height of the triangle and the thickness ratio is 0.5, the maximum output voltage is 2.12 V. The experimental results verify the feasibility of the designed device and provide new ideas for subsequent research on piezoelectric energy capture.

In order to investigate the optimal power generation performance of piezoelectric materials, a spin-magnetic piezoelectric generator was designed and the relationship between output voltage and speed and external force was derived through theoretical analysis. The maximum deformation and resonant frequency of the piezoelectric oscillator under magnetic drive are derived from simulation analysis. Finally, the relationship between output voltage and magnet size, distance between two magnets, and speed was tested experimentally, and the experimental data agreed with the theoretical analysis. The results show that when the speed is 312 r/min, magnet pitch is 12 mm, and magnet size is 10 mm 35 mm 4, the maximum output voltage is 54 V. This can meet the power supply needs of micro and small electronic products.