Modern CNC machine tools provide lookup tables to enhance the machine tool’s precision but the generation of table entries can be a demanding task. In this paper, the coefficients of the 25 cubic polynomial functions used to generate the LUTs entries for a five-axis machine tool are obtained by solving a linear system incorporating a Vandermonde expansion of the nominal control jacobian. The necessary volumetric errors within the working volume are predicted from the machine’s geometric errors estimated by the indirect error identification method based on the on-machine touch probing measurement of a reconfigurable uncalibrated master ball artifact (RUMBA). The proposed scheme is applied to a small Mitsubishi M730 CNC machine. Two different error models are used for modeling the erroneous machine tool, one estimating mainly inter-axis errors and the other including numerous intra-axis errors. The table-based compensation is validated through additional on-machine measurements. Experimental tests demonstrate a significant reduction in volumetric errors and in the effective machine error parameters. The LUTs reduce most of the dominant machine error parameters. It is concluded that although being effective in correcting some geometric errors, the generated LUTs cannot compensate for some axis misalignments such as EB(OX)A and EB(OX)Z. The root-mean-square of the translational volumetric errors is improved from 87.3, 75.4, and 71.5 µm down to 24.8, 18.8, and 22.1 µm in the X-, Y-, and Z-directions, respectively.
On Machine Measurements are a key factor for shorter closed quality control loops in industrial manufacturing. Especially for the production of large components, they promote the first-time-right approach, which is highly desirable, due to small quantities and steep value chains. In contrast to measurement rooms for CMMs, the production environment conditions are unregulated and impact multiple factors along the on-machine measurement metrological chain. As presented as a keynote speech at the XXXI CIRP Sponsored Conference on Supervising and Diagnostics of Machining Systems "MANUFACTURING ACTIVE IMPROVEMENT" by Professor Dr. Robert H. Schmitt, this article reviews current research and ideas regarding on-machine measurements. The authors collect necessary process data with the help of new technologies in the course of digitalization and thus propose a holistic model for systematic error compensation and measurement uncertainty prediction. For assessing the machine’s volumetric accuracy under thermal loads, the authors develop a novel modelling approach, which determines transient geometric errors by abstracting structural parts as spline curve with typical deformation modes. To address the workpiece’s influence on the measurement process, a data-driven framework, fusing real-time sensor-data with the virtual component, is used to model and predict transient thermo-mechanical workpiece states. For dissemination, the authors continue working on ISO standardization and, as subjects of future research, explore new paths in terms of data-driven modelling approaches, using physical abstractions coupled with machine learning and live process data.
Uncontrolled environmental conditions often impact manufacturing processes and lead to product quality fluctuations. For machine tools, thermal influences are a major limitation to the volumetric performance. Climate controls for the shop floor, and machines, or thermally stable structural designs are economically not feasible, promoting control-based compensation as a possible solution. Since the relationship between disturbing quantities and effects are complex and specific to each machine, appropriate modelling is a critical requirement. The authors describe an approach for developing hybrid models, superposing white-box model knowledge, and machine learning. The overall effort can be optimized by combining and balancing different modelling methods, like designing the physical model part and training intelligent algorithms. A general model structure allows a continuous integration of different white-box and black-box model components. The authors integrate self-developed smart sensors into a demonstrator machine tool to test and validate the performance of the approach.
1 April 2021 in Zeitschrift für wirtschaftlichen Fabrikbetrieb
Bei On-Machine Measurements werden Bauteile direkt mit dem Messtastersystem der Maschine gemessen. So wird im Vergleich zur Messung per KMG (Koordinatenmessgeräte) der Aufwand zur dimensionellen Bauteilprüfung und einer anschließenden Korrektur fehlerhafter Bauteile erheblich reduziert. Es wird eine Dateninfrastruktur vorgestellt, welche die aus der Maschine stammenden Daten annotiert speichert. Mithilfe der gesammelten Daten kann die Maßhaltigkeit des Bauteils automatisch erkannt werden.**
The main objectives in production technology are quality assurance, cost reduction, and guaranteed process safety and stability. Digital shadows enable a more comprehensive understanding and monitoring of processes on shop floor level. Thus, process information becomes available between decision levels, and the aforementioned criteria regarding quality, cost, or safety can be included in control decisions for production processes. The contextual data for digital shadows typically arises from heterogeneous sources. At shop floor level, the proximity to the process requires usage of available data as well as domain knowledge. Data sources need to be selected, synchronized, and processed. Especially high-frequency data requires algorithms for intelligent distribution and efficient filtering of the main information using real-time devices and in-network computing. Real-time data is enriched by simulations, metadata from product planning, and information across the whole process chain. Well-established analytical and empirical models serve as the base for new hybrid, gray box approaches. These models are then applied to optimize production process control by maximizing the productivity under given quality and safety constraints. To store and reuse the developed models, ontologies are developed and a data lake infrastructure is utilized and constantly enlarged laying the basis for a World Wide Lab (WWL). Finally, closing the control loop requires efficient quality assessment, immediately after the process and directly on the machine. This chapter addresses works in a connected job shop to acquire data, identify and optimize models, and automate systems and their deployment in the Internet of Production (IoP).
The analysis and reuse of measured process data are enablers for sustainable and resilient manufacturing in the future. Maintaining high measurement data quality is vital for maximising the usage and value of the data at hand. To ensure this data quality, the data management must be applied consequently throughout the complete Data Life-Cycle (DLC) and adhere to the FAIR guiding principles. In the two research consortia NFDI4Ing and the Cluster of Excellence “Internet of Production,” we investigate approaches to increase the measurement of data quality by integrating the FAIR guiding principles in all data management activities of the DLC. To facilitate the uptake of the FAIR guiding principles, we underline the significance of FAIR data for the reuse of high-quality data. Second, we are introducing a harmonised DLC to streamline data management activities. Third, we concisely review current trends and best practices in FAIR-aware data management and give suggestions for implementing the FAIR guiding principles.