Dominique Morvan

Dr. Dominique Morvan


Research Focus & Metrics

Academic Career Length

27Years (2000-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 August 2018 in International Journal of Wildland Fire
Verified
Journal Article
Closed access
PDF file
DMDominique Morvan
Dominique Morvan
NFN. Frangieh
N. Frangieh
With fuel moisture content and slope, wind velocity (UW) is one of the major physical parameters that most affects the behaviour of wildland fires. The aim of this short paper was to revisit the relationship between the rate of spread (ROS) and the wind velocity, through the role played by the two forces governing the trajectory of the flame front and the plume, i.e. the buoyancy of the plume and the inertia due to wind. A large set of experimental data (at field and laboratory scale) from the literature was analysed, by introducing the ratio between these two forces, namely Byram’s convective number NC and considering the relationship between the fire ROS/wind speed ratio and Byram’s number. This short note was also an opportunity to make a point on particular issues, such as the existence of two regimes of propagation of surface fires (wind-driven fire vs plume-dominated fire), the relative importance of the two modes of heat transfer (by convection and radiation) on the propagation of a fire front, and others scientific debates animating the wildland fire community.

24 January 2014 in Combustion Science and Technology
Verified
Journal Article
Closed access
DMDominique Morvan
Dominique Morvan
The subject of this article concerns the unsteady effects (fire intensity, wind) upon the propagation and, more generally, the behavior of surface fires in open fields. The study focused on two sources of unsteadiness: the first one resulting from the regime of propagation (wind driven or plume dominated), which can affect greatly the behavior of the flame front and consequently the fire intensity, the second one resulting from the wind gusts associated with the conditions of flow of wind in real conditions. The study was based on numerical simulations, using a multiphase formulation, and on spectral analysis of the time evolution of the fire line intensity. The calculations were performed in 2D for a homogeneous vegetation layer (grassland) and for a large interval of wind conditions (10 m open wind velocity U10 ranged between 1 m/s and 25 m/s). The results have highlighted the link between the unsteady character of flame front behavior and the regime of propagation (plume dominated, wind driven). A particular interest was focused on the role played by two potential sources of instabilities, namely the Kelvin-Helmholtz instability (wind effects) and the thermo-convective instability (plume effects), upon the behavior of fires. A second set of simulations has been carried out using unsteady wind conditions, reproduced using sinusoidal boundary conditions for the streamwise velocity, with a frequency ranging between 0.5 Hz and 3 Hz.

1 January 2022 in Comptes Rendus Mécanique
Verified
Journal Article
Closed access
PDF file
DMDominique Morvan
Dominique Morvan
GAGilbert Accary
Gilbert Accary
SMSofiane Meradji
Sofiane Meradji
NFNicolas Frangieh
Nicolas Frangieh
The aim of this short review is to present the progress made in wildland fire modelling during the last 50 years and the intellectual track followed by wildland fires models, from fully empirical models in the 60s, to semi-empirical ones in the 70s, to fully physical models at the end of the 90s. During the last period, the large diffusion of HPC methods substantially contributed to the development of multiphase formulations applied to wildland fire modelling. Many studies have particularly focused on the effects of various parameters (vegetation, topography, atmosphere) affecting the behaviour of a fire front propagating through a forest fuel layer.

27 February 2023 in Atmosphere
Verified
Journal Article
Open access
PDF file
JFJacky Fayad
Jacky Fayad
FMFrédéric Morandini
Frédéric Morandini
Gilbert AccaryGilbert Accary
Gilbert Accary
FCFrançois-Joseph Chatelon
François-Joseph Chatelon
CWClément Wandon
Clément Wandon
JRJean-Louis Rossi
Jean-Louis Rossi
This paper reports two experimental fires conducted at field-scale in Corsica, across a particular mountain shrubland. The orientation of the experimental plots was chosen in such a way that the wind was aligned along the main slope direction in order to obtain a high intensity fire. The first objective was to study the high intensity fire behavior by evaluating the propagation conditions related to its speed and intensity, as well as the geometry of the fire front and its impact on different targets. Therefore, an experimental protocol was designed to determine the properties of the fire spread using UAV cameras and its impact using heat flux gauges. Another objective was to study these experiments numerically using a fully physical fire model, namely FireStar3D. Numerical results concerning the fire dynamics, particularly the ROS, were also compared to other predictions of the FireStar2D model. The comparison with experimental measurements showed the robustness of the 3D approach with a maximum difference of 5.2% for the head fire ROS. The fire intensities obtained revealed that these experiments are representative of high intensity fires, which are very difficult to control in the case of real wildfires. Other parameters investigated numerically (flame geometry and heat fluxes) were also in fairly good agreement with the experimental measurements and confirm the capacity of FireStar3D to predict surface fires of high intensity.

18 May 2023 in Fire
Verified
Journal Article
Open access
PDF file
JFJacky Fayad
Jacky Fayad
Gilbert AccaryGilbert Accary
Gilbert Accary
FMFrédéric Morandini
Frédéric Morandini
FCFrançois-Joseph Chatelon
François-Joseph Chatelon
Lucile RossiLucile Rossi
Lucile Rossi
JRJean-Louis Rossi
Jean-Louis Rossi
A safe separation distance (SSD) needs to be considered during firefighting activities (fire suppression or people evacuation) against wildfires. The SSD is of critical interest for both humans and assets located in the wildland–urban interfaces (WUI). In most cases, the safety zone models and guidelines assume a flat terrain and only radiant heating. Nevertheless, injuries or damage do not result exclusively from radiant heating. Indeed, convection must be also considered as a significant contribution of heat transfer, particularly in the presence of the combined effects of sloping terrain and a high wind velocity. In this work, a critical case study is considered for the village of Sari-Solenzara in Corsica (France). This site location was selected by the operational staff since high-intensity fire spread is likely to occur in the WUI during wind-blown conditions. This study was carried out for 4 m high shrubland, a sloping terrain of 12° and a wind speed of 16.6 m/s. The numerical simulations were performed using a fully physical fire model, namely, FireStar2D, to investigate a case of fire spreading, which is thought to be representative of most high wildfire risk situations in Corsica. This study is based on the evaluation of the total (radiative and convective) heat flux received by two types of targets (human bodies and buildings) located ahead of the fire front. The results obtained revealed that the radiation was the dominant heat transfer mode in the evaluation of the SSD. In addition, the predictions were consistent with the criterion established by the operational experts, which assumes that in Corsica, a minimum SSD of 50 m is required to keep an equipped firefighter without injury in a fuelbreak named ZAL. This numerical work also provides correlations relating the total heat flux to the SSD.

1 March 2000 in International Journal of Numerical Methods for Heat & Fluid Flow
Verified
Journal Article
Closed access
DMDominique Morvan
Dominique Morvan
BPB. Porterie
B. Porterie
JLJ.C. Loraud
J.C. Loraud
MLM. Larini
M. Larini
Reports numerical simulations of an unconfined methane-air turbulent diffusion flame expanding from a porous burner. Turbulent combustion is simulated using the eddy dissipation concept (EDC) which supposes that the reaction rate is controlled by the turbulent structures which enhance the mixing of fuel and oxidant. Two statistical k-ε turbulence models have been tested: a standard high Reynolds number (HRN) and a more recent model based on the renormalization group theory (RNG). Radiation heat transfer and soot formation have been taken into account using P1-approximation and transport submodels which reproduce the main phenomena encountered during soot production (nucleation, coagulation, surface growth). The set of coupled transport equations is solved numerically using a high order finite-volume method, the velocity-pressure coupling is treated by a projection technique. The numerical results confirm that 20-25 percent of the combustion heat released is radiated away from the flame. Unsteady and unsymmetrical flame behaviour is observed for small Froude numbers which results from the development of Rayleigh-Taylor like instabilities outside the flame surface. For higher Froude numbers the steady-state and symmetrical nature of the solution is recovered.