Strong overpressure conditions are widely distributed in the deep Longmaxi Formation (Fm) shale reservoirs in the Southern Sichuan Basin, with pressure coefficients ranging from 1.75 to 2.45. Overpressure plays a positive role in the high yield of shale gas, but a detailed study of its generation mechanism, evolution history, and potential impact on pore development is still lacking. This study’s evidence from theoretical analysis and the logging response method indicates that hydrocarbon generation expansion is the main generation mechanism for strong overpressure. Through the combined analysis of basin modeling, inclusions analysis, and numerical simulation, pressure evolution at different stages is quantitatively characterized. The results show that, during the shale’s long-term subsidence process, the shale reservoir’s pressure coefficient increased to 1.40 because of oil generated by kerogen pyrolysis. Then it increased to 1.92 due to gas generated by residual oil cracking. During the late strong uplift process of the shale, temperature decrease, gas escape, and stratum denudation caused the pressure coefficient to first decrease to 1.84 and then increased to 2.04. Comparing pore characteristics under different pressure coefficients indicates that higher pressure coefficients within shale reservoirs contribute to the maintenance of total porosity and the development of organic macropores, but the influence on the morphology of organic pores is negligible. These results will provide the scientific basis for optimizing sweet spots and guiding shale gas exploration in the study area.
The pore structure characterization and its controlling factors in overmature shales are keys to understand the shale gas accumulation mechanism. Organic matter in source rocks is a mixture of various macerals that have their own specific evolutionary pathways during thermal maturation. Pores within macerals also evolve following their own path. This study focused on petrographic characterization and maceral controls on porosity in overmature marine shales in China and the United States. Shale from Ordos Basin in China was also selected as an example of overmature transitional shale for maceral comparison. Organic petrology techniques were used to identify maceral types and describe morphological features in detail; scanning electron microscopy techniques were then used to document the abundance and development of pores within macerals. Helium measurement, mercury intrusion capillary pressure, and CO2 adsorption were especially applied to quantify the pore structure of Wufeng-Longmaxi shale from Sichuan Basin in China. The vitrinite reflectance equivalent of the studied overmature samples is ~2.4%. The macerals within the studied marine shales are composed mainly of pyrobitumen and zooclasts. At this maturity, pyrobitumen develops abundant gas-related pores, and their volume positively correlates to gas content. Three types of pyrobitumen and its related pore structure are characterized in Wufeng-Longmaxi shales. Zooclasts contribute to total organic carbon (TOC) content but little to porosity. When the TOC content is above 1.51% in Wufeng-Longmaxi samples, the TOC content positively correlates to quartz content. Organic matter strongly controls micropore development. Pores of provide a significant amount of micropore volume. Clay mineral and quartz contents control micro- and macropore increments in organic-lean shales. MICP results indicate that pores within 3-12 nm and 900-2500 nm account for a major contribution to pore volume obtained. Determining the proportions of pyrobitumen to zooclasts within the total organic matter in pre-Devonian organic-rich marine shales is important in predicting porosity and gas storage capacity in high-maturity shales.
1 January 2025 in Earth Science-Journal of China University of Geosciences