Recent progress in the fabrication of controlled structures and advanced materials has improved battery performance in terms of specific capacity, rate capability, and cycling stability. However, interfacial problems such as increased resistance and contact instability between the electrodes and solid/liquid electrolytes still put pressure on the controllable formation of structures and the improvement of performance as well as safety. Here, we first briefly introduce the deposition techniques in terms of working mechanism and experimental process, then illustrate the associated advantages/disadvantages of the surface engineering methods based on deposition techniques (physical vapor deposition and chemical reaction deposition) to the provision of reference for researchers selecting the appropriate approach. Second, we exemplify the Si/LiCoO2/LiPON/Li to demonstrate the main progress made in lithium-ion batteries, elaborating on the efforts in engineering the reactive surface utilizing the deposition techniques. Finally, general conclusions and prospects for future advanced thin film deposition techniques in the field of lithium-ion batteries are presented.
The thickness nonuniformity of an electroformed layer is a bottleneck problem for electroformed micro metal devices. In this paper, a new fabrication method is proposed to improve the thickness uniformity of micro gear, which is the key element of various microdevices. The effect of the thickness of the photoresist on the uniformity was studied by simulation analysis, which showed that as the thickness of the photoresist increased, the thickness nonuniformity of the electroformed gear should decrease due to the reduced edge effect of the current density. Differently from the traditional method performed by one-step front lithography and electroforming, multi-step, self-aligned lithography and electroforming are used to fabricate micro gear structures in proposed method, which intermittently keeps the thickness of photoresist from decreasing during processes of alternate lithography and electroforming. The experimental results show that the thickness uniformity of micro gear fabricated by the proposed method was improved by 45.7% compared with that fabricated by the traditional method. Meanwhile, the roughness of the middle region of the gear structure was reduced by 17.4%.
Thickness nonuniformity is a bottleneck in the micro electroforming process of micro-metal devices. In this paper, a new method of fabricating a layered auxiliary cathode is proposed to improve the thickness uniformity of a micro-electroforming layer. In order to analyze the general applicability of the proposed method, four basic microstructures, namely circular, square, regular triangular, and regular hexagonal were used to study the effect of a layered auxiliary cathode on thickness uniformity through simulation and experimentation. The simulation results showed that with the help of the proposed auxiliary cathode, the thickness nonuniformity of four microstructures should decrease due to the reduced edge effect of the current density. The experimental results showed that the thickness uniformity of four microstructures fabricated via the proposed method was improved by 190.63%, 116.74%, 80.43%, and 164.30% compared to that fabricated via the traditional method, respectively. Meanwhile, the micro-gear was fabricated and the nonuniformity was reduced by 101.15% using the proposed method.
1 July 2025 in Journal of Microelectromechanical Systems
In response to the critical need for low-voltage devices in advancing miniaturization technology, this study introduces a groundbreaking piezoelectric micro-electro-mechanical-systems (MEMS) scanning micromirror architecture employing a C-beam cantilever structure. This study employs lead zirconate titanate (PZT) thin films with excellent transverse piezoelectric coefficient (d31) and dielectric constant and innovatively designs and fabricates three micromirror devices (reference design, T-beam design, and C-beam design) that maintain equivalent driving areas. This study demonstrates that the C-beam structure exhibits outstanding performance in driving voltage efficiency. Compared to the T-shaped beam design, under identical scanning angle conditions (30°), the driving voltage is reduced from 70 Vpp to 6 Vpp — a 91.42% reduction. Furthermore, after implementing a pre-polarization process (−30 V, 25 min), the C-beam micromirror achieves the optical scanning angle of 87.56° at 24 Vpp driving voltage. This significant improvement highlights the critical role of structural geometry and pre-polarization treatment in MEMS actuator performance. [2025-0061]
25 April 2026 in Sensors and Actuators A: Physical
We develop a novel and convenient method to prepare large area single-layer and multi-layer graphene through surface modification with oxygen plasma. The obtained large area single-layer graphene is dozens of microns wide in the lateral dimension and characterized by optical microscopy, atomic force microscopy. Raman spectroscopy show multilayer graphene has less disorder density than single-layer graphene. X-ray photoelectron spectroscopy (XPS) analysis shows that hydroxyl groups are formed on the HOPG surface during oxygen plasma pre-treatment. Hydrogen bonds develop between hydroxyl groups on HOPG surface and silanol groups on hydroxylated SiO2/Si substrate, which facilitate the transfer process. This study may provide a potential approach to develop graphene-based devices by using the large area lithographic printing process.