The paper mainly studied the temperature rise characteristics of under-race lubricated high-speed angular contact ball bearings under operational conditions from the perspective of dynamics. The steady-state calculation model of the bearing was established using a thermal network method in consideration of the influence factor of friction power consumption in bearing components based on a dynamic model. Following this, the steady-state change characteristics of the bearing were obtained by solving a thermal balance equation. Through this process, the influence laws of bearing rotation speed, oil supply, and environmental temperature on the friction temperature rise of the bearing were analyzed. Finally, the finite element analysis software ANSYS was employed to provide comparative verification. The results showed that the bearing temperature nonlinearly increased with the increase in inner ring rotation speed, and when it approached a certain critical value, the outer ring temperature exceeded the inner ring temperature. It had an obvious effect on controlling the temperature rise of the bearing inner ring by way of increasing the quantity and reducing the temperature of the lubricating oil supply. Comparative verification showed that the speed–temperature variation tendency from the dynamics-based thermal analysis well agrees with that of the finite element analysis.

Real-time condition monitoring and fault diagnosis of spindle bearings are critical to the normal operation of the matching machine tool. In this work, considering the interference of random factors, the uncertainty of the vibration performance maintaining reliability (VPMR) is introduced for machine tool spindle bearings (MTSB). The maximum entropy method and Poisson counting principle are combined to solve the variation probability, so as to accurately characterize the degradation process of the optimal vibration performance state (OVPS) for MTSB. The dynamic mean uncertainty calculated using the least-squares method by polynomial fitting, fused into the grey bootstrap maximum entropy method, is utilized to evaluate the random fluctuation state of OVPS. Then, the VPMR is calculated, which is used to dynamically evaluate the failure degree of accuracy for MTSB. The results show that the maximum relative errors between the estimated true value and the actual value of the VPMR are 6.55% and 9.91%, and appropriate remedial measures should be taken before 6773 min and 5134 min for the MTSB in Case 1 and Case 2, respectively, so as to avoid serious safety accidents that are caused by the failure of OVPS.

In the ultra-low temperature environment, the material properties of the bearing change, which puts forward higher requirements for the dynamic performance of the bearing cage. The bearings operating in ultra-low temperature environments commonly use solid lubricants. This study first focused on measuring the traction coefficients of molybdenum disulfide (MoS₂) solid lubricant in a nitrogen atmosphere, and the Gupta fitting model is constructed to derive the traction equation. Subsequently, the dynamic differential equation of angular contact ball bearings was established, and the stability of the bearing cage in a nitrogen environment was simulated and analyzed based on the dynamic model. The accuracy of the simulation model was verified through comparison. The results show that less than 10% of errors exist between the experimental data and the traction curve fitted by the Gupta model, and the stability of the cage is closely related to operating parameters and bearing structure parameters. Cage stability increases with axial load but decreases with radial load. The cage stability is optimal when the radial internal clearance of the bearing is approximately 0.06 mm. When other conditions remain unchanged and the ratio of the cage pocket hole gap to the cage guide surface gap is 0.2, the cage stability is the best. The research results will provide a foundation for the design and application of solid-lubricated angular contact ball bearings in ultra-low temperature environments.

This article focuses on the problem of sealing failure in high-speed micro bearings. Based on a thermal-stress coupled finite element model, the distribution of equivalent stress and contact pressure of the sealing ring and the influence of various factors on the sealing performance are analyzed. Based on this, the Latin Hypercube sampling method, Kriging surrogate model and genetic algorithm are used to find the optimal combination of sealing performance. Finally, the accuracy of the model and method is verified through orthogonal experiments. Research has found that the maximum equivalent stress of the seal ring is 0.59234 MPa, and it increases first and then decreases with the increase in lip inclination angle, friction coefficient and radial interference amount, increases with the increase in lubricant temperature, and decreases with the increase in bearing rotation speed. The maximum contact pressure is 0.20433 MPa, and it decreases with the increase in the lip inclination angle, increases first and then decreases with the increase in the friction coefficient, and decreases first and then increases with the increase in the lubricant temperature, bearing rotation speed and radial interference amount. The most significant factor affecting the equivalent stress of the seal ring is the lubricant temperature, and the most significant factor affecting the contact stress is the interference fit amount. When the seal lip inclination angle is 43.99°, the friction coefficient is 0.01 mm, the lubricant temperature is 111.5 °C, the bearing rotation speed is 28,853 rpm and the radial interference amount is 0.04 mm, the sealing performance of the sealing ring is optimal.

With the advancement of industries such as high-speed railways, new energy vehicles, and wind power, bearings are frequently exposed to various electric field environments, leading to the need for lubricating oil films of bearings to withstand voltage. One of the major issues caused by the breakdown discharge process of the lubricating oil film in bearings is the generation of local instantaneous high temperatures. This temperature rise is a key factor contributing to problems such as high operating temperature of bearings, surface damage in the contact area, and degradation of lubrication performance. This research article focuses on the comprehensive influence of bearing friction and electrical factors. It establishes a heat source calculation model and a temperature field simulation model specifically for current-carrying bearings. This study analyzes both the overall temperature rise of bearings and the local temperature rise resulting from breakdown discharge. Furthermore, the accuracy of the simulation analysis is verified through experiments. The temperature field simulation and experimental results consistently indicate that electrical environmental factors can cause an increase in the overall temperature rise of a bearing. Additionally, the breakdown and discharge of the lubricating oil film generate local instantaneous high temperatures in the contact area of the bearing.

The traction motor is a crucial component of high-speed electric multiple units, and its operational reliability is directly impacted by the temperature increase in the bearings. To accurately predict and simulate the temperature change process of traction motor bearings during operation, a fluid–solid–thermal simulation analysis model of grease-lubricated deep groove ball bearings was constructed. This model aimed to simulate the temperature rise of the bearing and the grease flow process, which was validated through experiments. The results from the simulation analysis and tests indicate that the temperature in the contact zone between the bearing rolling element and the raceway, as well as the ring temperature, initially increases to a peak and then gradually decreases, eventually stabilizing once the bearing’s heat generation power and heat transfer power reach equilibrium. Furthermore, the established fluid–solid–thermal coupling simulation analysis model can accurately predict the amount of grease required for effective lubrication in the bearing cavity, which stabilizes along with the bearing temperature. The findings of this research can serve as a theoretical foundation and technical support for monitoring the health status of high-speed EMU traction motor bearings.