This in vitro study evaluated bacterial cell proliferation and biofilm adhesion on titanium discs with and without antibacterial surface treatment to reduce the chances of peri-implant infections. Hexagonal boron nitride with 99.5% purity was converted to hexagonal boron nitride nanosheets via the liquid phase exfoliation process. The spin coating method was used for uniform coating of h-BNNSs over titanium alloy (Ti6Al4V) discs. Two groups of titanium discs were formed: Group I (n = 10) BN-coated titanium discs and Group II (n = 10) uncoated titanium discs. Two bacterial strains, Streptococcus mutans (initial colonizers) and Fusobacterium nucleatum (secondary colonizers), were used. A zone of inhibition test, microbial colony forming units assay, and crystal violet staining assay were used to evaluate bacterial cell viability. Surface characteristics and antimicrobial efficacy were examined by scanning electron microscopy with energy dispersion X-ray spectroscopy. SPSS (Statistical Package for Social Sciences) version 21.0 was used to analyze the results. The data were analyzed for probability distribution using the Kolmogorov-Smirnov test, and a non-parametric test of significance was applied. An inter-group comparison was done using the Mann-Whitney U test. A statistically significant increase was observed in the bactericidal action of BN-coated discs compared to uncoated discs against S. mutans, but no statistically significant difference was found against F. nucleatum.

This current paper aims to review the literature on the root canal configuration (RCC) and root structure of permanent mandibular premolars. To find the published scientific literature on the RCC of mandibular premolars up to July 2022, a systematic search of four electronic databases was performed. The studies were selected, rendering to a predetermined point of reference: “mandibular 2nd premolar”, “root and canal system”, “morphology of root and canal”, “root and canal configuration”, and “morphology”, along with “anatomy” and “mandibular premolars”. Cross-referencing along with screening through the bibliographies of the chosen articles resulted in the identification of further studies. In the current study, we examined 30 different articles, and we chose them based on the quality of research investigations. From 3471 retrieved studies, a total of 15981 mandibular 2nd premolars were observed in 30 studies. The mean JBI score for studies assessing the structure of the root, as well as the root canal of the mandibular 2nd premolar, was 7.78 ± 0.81. We have found a pooled prevalence of 91.82% for Vertucci class I root canal morphology and 78.63% pooled prevalence of single-rooted mandibular second premolar. A total of 8677 mandibular 1st premolars were observed in 22 studies. The mean JBI score for studies assessing the structure and anatomy of the root, as well as root canal of mandibular 1st premolar, was 7. 95 ± 0.85. We have found a pooled prevalence of 74.34% for Vertucci class I root canal morphology and 85.20% pooled prevalence of single-rooted mandibular 1st premolar. Mandibular first and second premolars were mostly single-rooted teeth (89.5–100%). The most frequently seen RCC is a 1-1-2-/2 (type V–Vertucci’s), followed by 1-1-2-/1 (type IV– Vertucci’s; type III–Weine’s), and finally RCC 2-2-2-1 (type IV–Vertucci’s; type III–Weine’s). Presently, the imaging of CBCT is the most used research approach for studying Mn2Ps’ structural characteristics.

Intrabony defects can be treated by various approaches. Use of GTR along with bone grafts is said to enhance the outcome. The periosteum has been claimed to increase the regeneration. The egg-shell-derived nano hydroxyapatite (EnHA) has shown a scope as alloplastic graft. Thus, the following study was undertaken to combine the periosteal pedicle along with EnHA for the treatment of intrabony defects under magnification to achieve optimal bone regeneration. A total of 21 patients, having intrabony defects with ≥6 mm probing depth (PD) and two or three wall defects as detected on CBCT, satisfying inclusion criteria were enrolled. The sites were randomly allocated as Group A, B and C (n = 7). The following parameters, defect density and defect fill in CBCT (at baseline and 6 months), PPD, RAL, Plaque index (PI), Gingival index (GI) and Gingival Bleeding Index (GBI) were recorded at baseline, 1, 3 and 6 months. p < 0.05 is considered as statistically significant. Bone density and bone fill values were found to be much higher in pedicle with EnHA and EnHA alone group and the values showed statistically significant results. The current clinical research showed that periosteal pedicle along with EnHA and EnHA as stand-alone therapy gave superior results compared to OFD alone, which is an innovative and feasible treatment option.

Dental caries is one of the most common non-communicable diseases in humans. Various interventions are available for the management, of which microinvasive techniques such as infiltration, sealants, glass ionomers, are novel and convenient. The purpose of this systematic review and meta-analysis was to compare microinvasive techniques with noninvasive or invasive treatment modalities in terms of effectiveness in halting interproximal caries lesion progression radiographically assessed. The review was registered on PROSPERO (CRD42024557636). Three electronic databases, PubMed, Google Scholar and Cochrane Oral Health Group Trial Register, were searched for the randomized controlled trials comparing any of the microinvasive techniques with either non- invasive or invasive treatments for non-cavitated proximal lesions both in primary and permanent teeth. The radiographic lesion progression was set as primary outcome. Rayyan and EndNote X9 were used for screening and full text review respectively. The risk of bias was assessed using Cochrane Risk of Bias tool. We performed analysis with the help of RevMan5.4 and calculated odds ratio and 95% confidence interval for evaluation of efficacy. The quality of evidence was assessed with the help of GRADEpro. A total of 185 studies were recruited after initial search, of which 18 were recruited after screening. Finally, 13 studies were included, and all were split mouth randomized controlled trials comparing various microinvasive techniques with non-invasive techniques. Five of the included trials studied primary teeth in children ranging from 3 to 9 years and seven trials assessed permanent teeth in children and adults ranging from 11 to 45 years while one trial included children having lesions on both primary and permanent teeth. The risk of bias assessment showed that 2 of the included studies had unclear risk of bias whereas 11 were at low risk of bias. Tau2, I2, and Chi-Square tests (0.04, 10% and 7.50 respectively) showed minimum level of heterogeneity. The overall odds ratio (95% confidence interval) of 0.29 (95% CI 0.19–0.38) showed that microinvasive techniques were superior as compared to noninvasive techniques for the management of proximal lesions. The subgroup analysis was also performed for types of dentitions, various microinvasive interventions and levels of caries depth. All showed improved outcomes in case of microinvasive interventions as compared to noninvasive techniques. The publication bias was assessed using forest plot and there was no significant publication bias. The quality of evidence assessed by GRADEpro came out to be moderate. This review concludes that microinvasive techniques are superior to noninvasive interventions for the treatment of non-cavitated proximal lesions in both primary and permanent dentition. However, cost effectiveness, feasibility, durability, and long-term effects of microinvasive techniques need to be explored further.

The durability and patient acceptability of prosthesis can be gauged by the capacity of visible light curing lab composite resins to maintain color stability through time and use. Consequently, this study’s goal was to assess the color stability of three layering materials, incisal, dentin, and gingiva of SR Nexco lab composite, with exposure to coffee, Coca-Cola, and turmeric solution using a spectrophotometer. A total of 60 specimens (10 × 2 mm) of SR Nexco paste were prepared and were divided into three groups based on the layering material used. Five specimens of each group were immersed in staining solutions, namely, coffee, cola, and turmeric solution. Each group’s last five specimens were submerged in distilled water (control). The incubator that housed the samples was set to 37 °C. The CIE L*a*b* method was used to quantify the color differences (E) of specimens using a spectrophotometer at baseline and after two weeks of immersion. Using ANOVA testing, the average color change for each specimen was examined. Tukey tests were used for post hoc comparisons. The calculated mean color difference (ΔE) for incisal ranges from 3.73 (distilled water) to 28.70 (turmeric). The mean color difference (ΔE) for dentin ranges from 2.66 (distilled water) to 41.19 (turmeric). The mean color difference (ΔE) for gingiva ranges from 1.72 (distilled water) to 23.88 (turmeric). The results are statistically significant. The maximum color difference is noted for dentin specimens, and turmeric stains all three layering materials to a maximum. The color stability of SR Nexco paste layering materials is significantly affected by the discoloring agents used. The comparison of color change between the three layering materials of SR Nexco paste (dentin, incisal, and gingiva) is statistically not significant. Turmeric solution exhibits more discoloration followed by cola and coffee solution.

Background and Objective: A narrow alveolar ridge is an obstacle to optimal rehabilitation of the dentition. There are several complex and invasive techniques to counter the ridge augmentation dilemma, with most of them exhibiting low feasibility. Hence, this randomized clinical trial aims to evaluate the effectiveness of a Minimalistic Ridge Augmentation (MRA) technique, in conjunction with low-level laser therapy (LLLT). Materials and Methods: A total of 20 patients (n = 20) were selected, with 10 assigned to the test group (MRA+LLLT) and the other 10 to the control group (MRA). A vertical incision of approximately 10 mm was placed mesial to the defect and tunneled to create a subperiosteal pouch across the entire width of the defect. At the test sites, a diode laser (AnARC Fox^TM Surgical Laser 810 nm) was used to deliver LLLT (parameters: 100 mW, with a maximum energy distribution of 6 J/cm² in the continuous wave mode for 60 s per point) to the exposed bone surface inside the pouch, followed by graft (G-Graft, Surgiwear^TM, Shahjahanpur, India) deposition with a bone graft carrier. The control sites were not irradiated with a laser. Results: A horizontal ridge width gain of >2 mm was observed in both groups. The changes in bone density for the test and control groups were −136 ± 236.08 HU and −44.30 ± 180.89 HU, respectively. Furthermore, there was no statistically significant difference between the test and control groups in these parameters. Conclusion: The study findings reveal that the MRA technique is relatively simple and feasible for alveolar ridge augmentation. The role of LLLT in the process requires further elucidation.