In the energy sector, since the adoption of remote device management for massive advanced metering infrastructure (AMI) devices and Internet of Things (IoT) technology using a representational state transfer (RESTful) architecture, a blurred boundary has been developed between traditional AMI and IoT. With respect to smart meters, the standard-based smart metering protocol, called the device language message specification (DLMS) protocol, still has a predominant role in the AMI industry. Thus, we aim to propose a novel data interworking model in this article that embraces the DLMS protocol in AMI using the most promising IoT protocol, the so-called lightweight machine-to-machine (LwM2M) protocol. We provide a 1:1 conversion model using the correlation of the two protocols with an analysis of the object modeling and resource management methods of both the LwM2M and DLMS protocols. The proposed model utilizes a complete RESTful architecture, which is the most beneficial in the LwM2M protocol. It improves the average packet transmission efficiency and packet delay on the plaintext and encrypted text (session establishment and authenticated encryption) by 52.9%p and 9.9%p, respectively, and by 11.86 ms for both cases, compared to the encapsulation method of the LwM2M protocol, KEPCO’s current approach. This work provides the key idea to unify the protocol for the remote metering and device management of field devices into the LwM2M protocol, and it is expected that this work will improve the efficiency in the operation and management of KEPCO’s AMI system.
1 August 2018 in International Journal of Grid and Distributed Computing
This paper proposes disturbance detection algorithms to mitigate the oscillations in smartphone camera module actuators induced by external shocks (e.g., drop events). Smartphone camera modules operate under volumetric constraints with inter-component trade-offs. Specifically, the limited space leads to insufficient performance because actuators are unstable under external disturbances. To optimize actuator function, we define the dynamic model of a voice coil motor (VCM) actuator, a controller model, and a shock disturbance model and perform worst-case operational analysis with MATLAB/Simulink (R2015a) simulations. Moreover, we propose two disturbance detection techniques: a phase-based detection algorithm that statistically analyzes the phase difference between the control input and the position feedback signal to detect disturbances and a frequency-based detection algorithm that uses discrete Fourier transform (DFT) to identify the characteristic spectral component of disturbances at 500 Hz. According to the simulation results, both methods reduce recovery time upon disturbance. Furthermore, the frequency-based algorithm achieves faster recovery performance than the phase-based detection algorithm. The phase-based detection method offers low computational complexity but increased processing latency, while the frequency-based detection method requires more memory capacity. The proposed techniques are anticipated to improve the recovery time of smartphone camera modules under disturbances, thereby enhancing system robustness and contributing to a more stable user imaging experience by mitigating image blur.