In this paper, we present a stable silver-based surface plasmon resonance (SPR) sensor using a self-assembled monolayer (SAM) as a protection layer and investigated its efficiency in water and 0.01 M phosphate buffered saline (PBS). By simulation, silver-based SPR sensor has a better performance in field enhancement and penetration depth than that of a gold-based SPR sensor, which are 5 and 1.4 times, respectively. To overcome the instability of the bare silver film and investigate the efficiency of the protected layer, the SAM of 11-mercapto-1-undecanol (MUD) was used as a protection layer. Stability experiment results show that the protected silver film exhibited excellent stability either in pure water or 0.01 M PBS buffer. The sensitivity of the silver-based SPR sensor was calculated to be 127.26 deg/RIU (refractive index unit), measured with different concentrations of NaCl solutions. Further, a very high refractive resolution for the silver-based SPR sensor was found to be 2.207 × 10⁻⁷ RIU, which reaches the theoretical limit in the wavelength of 632.8 nm for a SPR sensor reported in the literature. Using a mixed SAM of 16-mercaptohexadecanoic acid (MHDA) and a MUD layer with a ratio of 1:10, this immunosensor for the rabbit immunoglobulin G (IgG) molecule with a limit of detection as low as 22.516 ng/mL was achieved.

Aging has a serious impact on the properties of functional polymers. Therefore, it is necessary to study the aging mechanism to prolong the service and storage life of polymer-based devices and materials. Due to the limitations of traditional experimental methods, more and more studies have adopted molecular simulations to analyze the intrinsic mechanisms of aging. In this paper, recent advances in molecular simulations of the aging of polymers and their composites are reviewed. The characteristics and applications of commonly used simulation methods in the study of the aging mechanisms (traditional molecular dynamics simulation, quantum mechanics, and reactive molecular dynamics simulation) are outlined. The current simulation research progress of physical aging, aging under mechanical stress, thermal aging, hydrothermal aging, thermo-oxidative aging, electric aging, aging under high-energy particle impact, and radiation aging is introduced in detail. Finally, the current research status of the aging simulations of polymers and their composites is summarized, and the future development trend has been prospected.