Ali Kursad Gorur

Dr. Ali Kursad Gorur


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 August 2020 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
AGAli Kursad Gorur
Ali Kursad Gorur
In this letter, a novel dual-band microstrip balun bandpass filter (BPF) is designed by using interdigital capacitor-loaded codirectional split ring resonators (CDSRRs). The utilized resonator is analyzed by coupled line theory and exhibits independently controllable dual resonance behavior. The proposed balun BPF is constructed by coupling two identical CDSRRs to rotationally symmetrical balanced output ports. Two transmission zeros (TZs) between the passbands can be observed by means of the CDSRRs. The designed balun BPF centered at 1.59 and 1.92 GHz was also fabricated and measured. The measured results show a good agreement with the predicted results. Phase and magnitude imbalances between the balanced output ports have been measured as better than 180 ± 5° and 0.4 dB, respectively. The proposed dual-band balun BPF exhibits high filtering performances in terms of closely spaced passbands, selectivity, and clean upper stopband.

1 July 2024 in IEEE Access
Verified
Journal Article
Open access
AGAli Kursad Gorur
Ali Kursad Gorur
DPDimitra Psychogiou
Dimitra Psychogiou
This paper reports on the design and experimental validation of a new class of frequency-tunable filters with switchable bandpass-to-bandstop transfer function characteristics. Single- and dual-band filter topologies are developed by coupling dual-mode loop resonators (DMLRs) to the feedline between the RF input and output ports of the filter. The bandpass-to-bandstop reconfigurability is realized by adding/removing an in-parallel cascaded thru line using single pole double throw (SPDT) switches. Center frequency tunability is achieved by incorporating three varactor diodes in the DMLRs. For experimental validations purposes, two filters with single- and dual-band responses were implemented and tested and appear to be in a good agreement with the EM simulated performance. For the single-band bandpass-to-bandstop filter, the RF-measured tuning range for the bandpass mode of operation is 1.65-1.96 GHz, and for the bandstop mode or operation it is 1.68-1.93 GHz. The dual-band bandpass-to-bandstop filter exhibits the RF-measured tuning ranges of 1.38-1.53 GHz for the first passband and 1.82-2.08 GHz for the second passband in the bandpass mode operation. The minimum insertion loss varies between 3.3 and 6.8 dB for the first passband, whereas it is between 2.2 and 4.7 dB in the second passband. The RF-measured tuning ranges in its bandstop mode of operation were measured between 1.35-1.47 GHz and 1.75-2.01 GHz.

1 January 2021 in Progress In Electromagnetics Research Letters
Verified
Journal Article
Closed access
SESeda Elden
Seda Elden
AGAli Kursad Gorur
Ali Kursad Gorur

5 November 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
AGAli Kursad Gorur
Ali Kursad Gorur
EDEngin Dogan
Engin Dogan
GAGizem Ayas
Gizem Ayas
CKCeyhun Karpuz
Ceyhun Karpuz
AGAdnan Gorur
Adnan Gorur
In this article, a novel and simple design procedure for multibit chipless radio frequency identification (RFID) tags is introduced, which is based on the characteristics of dual-mode loop resonator (DMLR) and open-loop resonator (OLR). By removing a small patch element from the symmetry axis of the DMLR, a simple geometrical transition to an OLR to obtain different frequency codes can be achieved. Since the DMLR and OLR provide dual- and single-resonant frequencies, three different frequency codes can be observed using one resonator. Thus, $3^{N}$ codes can be performed by coupling $N$ resonators to input/output (I/O) ports. Even–odd mode analysis over the coupling mechanism of a single resonator is provided to characterize the frequency responses of the proposed resonators. To prove the proposed approach, two multiresonator circuits having four resonators were fabricated and tested in a good agreement. In the test environment, two horn antennas and a vector network analyzer have been utilized as transmitter and reader. Next, in order to achieve size reduction, meandered resonators are utilized instead of conventional DMLR and OLR. Based on these resonators, two RFID tags, including wideband monopole antennas integrated into the seven-resonator circuits on the same board, were also fabricated and tested.

7 October 2021 in International Journal of RF and Microwave Computer-Aided Engineering
Verified
Journal Article
Closed access
PDF file
AGAli Kursad Gorur
Ali Kursad Gorur
EDEngin Dogan
Engin Dogan
AGAdnan Gorur
Adnan Gorur

21 December 2017 in International Journal of RF and Microwave Computer-Aided Engineering
Verified
Journal Article
Closed access
PDF file
AGAli Kursad Gorur
Ali Kursad Gorur