For nearly a century, oxygen has been widely accepted as the key element that triggers photo-response in polycrystalline PbSe photoconductive detectors. Our photoluminescence and responsivity studies on PbSe samples, however, suggest that oxygen only serves as an effective sensitization improver and it is iodine rather than oxygen that plays the key role in triggering the photo-response. These studies shed light on the sensitization process for detector applications and ways to passivate defects in IV–VI semiconductors. As a result, high peak detectivity of 2.8 × 1010 cm·Hz1/2·W−1 was achieved at room temperature.
We introduce a charge separation model in this work to explain the mechanism of enhanced photoconductivity of polycrystalline lead salt photoconductors. Our results show that this model could clarify the heuristic fabrication processes of such lead salt detectors that were not well understood and often considered mysterious for nearly a century. The improved lifetime and performance of the device, e.g., responsivity, are attributed to the spatial separation of holes and electrons, hence less possibility of carrier recombination. This model shows that in addition to crystal quality the size of crystallites, the depth of outer conversion layer, and doping concentration could all affect detector performance. The simulation results agree well with experimental results and thus offer a very useful tool for further improvement of lead salt detectors. The model was developed with lead salt family of photoconductors in mind, but may well be applicable to a wider class of semiconducting films.
IV-VI multiple-quantum-well lasers with seven wells made from molecular-beam-epitaxy grown PbSe/PbSrSe have been operated in pulsed mode up to 282 K at a wavelength of λ=4.2 μm. This is the highest midinfrared quantum well laser operation temperature observed to date.
A series of PbSe thin films grown on a (111)-oriented Si substrate by molecular beam epitaxy were passivated by high-purity oxygen at different annealing temperatures. The photoluminescence intensity increased by more than two orders of magnitude at after annealing the samples in an atmosphere at . X-ray photoelectron spectroscopy revealed that PbO and were formed during the oxidation process of PbSe, thus confirming the formation of the surface passivation layer which resulted in the observed significant increase in PL intensity.
Strong spin- and wave-vector dependent upon electron resonant tunneling through antisymmetrical double-barrier magnetic structures are revealed. The electron transmission probability and the polarization of transmitted beams as a function of incident electron energy for different structures have been calculated. It is shown that the antisymmetric magnetic structure possesses the strongest spin polarization and well-pronounced wave-vector filtering properties. Surprisingly, a polarization of nearly 100% can be achieved by spin-dependent resonant tunneling in these structures, although the average magnetic field of the structures is zero.