Enhanced cell adherence to the surface of nanocrystallized commercially pure titanium (CP–Ti) was observed by several authors. However, the understanding of the surface modification of Ti in a physiological solution due to nanocrystallized grain size has not been reached. In this work, equal channel angular pressing (ECAP) was applied to manufacturing ultrafine grained CP–Ti. Martensite and Widmanstatten microstructures were also obtained for comparison. The CP–Ti pieces with different microstructures were subjected to soaking tests in a simulated body fluid. Electrochemical impedance spectroscopy (EIS) measurements, X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM), energy dispersive spectrometer (EDS) were used to characterize the surfaces. The results show the surface precipitates mainly contain Ti, O, Ca and P. The quantity of precipitates on ECAPed CP–Ti is the largest among different specimens corresponded to the observation of the thickest layer formation on ECAPed CP–Ti found by EIS. EDS results show more CaPO and less Ti are included on ECAPed Ti comparing to the deposits on other two types of specimens. Smaller numbers of precipitates and denser film are produced on the surface of the water-quenched CP–Ti. The regeneration kinetics of the CaP precipitates evaluated by Gibbs free energy is introduced to interpret the precipitating behaviors on different CP–Ti specimens.
Photocatalysis-enhanced surface deposition on titanium surfaces for biomedical applications is investigated in this work. Immersion tests of commercially pure titanium (CP-Ti) pieces in a simulated body fluid adding bovine serum albumin (BSA) under ultraviolet (UV) irradiation in situ are carried out. The morphologies of deposition are characterized by SEM and stereo imaging microscopy, and the quantity and composition of the deposition is examined by SEM, energy dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy. The results show a deposition layer with thickness 89 μm is produced on 600 °C heat-treated specimens. An irradiation pattern of lighting/dark repeated results in more deposition on heat-treated CP-Ti. It is confirmed that a mixture of anatase and rutile phases generated on 600 °C heat-treated specimens has enhanced photocatalysis. The decomposition of BSA by photocatalysis, a possible product of nitrite also results in enhanced deposition on Ti. EDS analysis shows large reduction of carbon in the deposition on UV-light exposed surfaces compared to no UV-light-exposed surfaces. Furthermore, C–H bond decreases and C–C, Ca–O, and P–O bond increases are found on photoactivated surfaces. The deposition produced by this method is expected to be useful for applications to biomaterials with high bioactivity.
The process of bone mineralization is affected by piezoelectricity. As biomedical materials, titanium and titanium alloys are widely used as implant materials due to their excellent mechanical and biological properties. They do not have piezoelectric properties. The preparation of a layer of zinc oxide film with good piezoelectric properties on the surface of titanium is conducive to enhancing the ability of bone mineralization. In this paper, the effect of the piezoelectricity of zinc oxide on the deposition of CaP on the surface of titanium alloy excited by sound waves in vitro was studied, providing a new idea for improving the surface bioactivity of titanium alloy. A dense nano ZnO film was prepared on TC4 sheet by hydrothermal synthesis using zinc chloride and sodium hydroxide as raw materials. The piezoelectric constant d33 of zinc oxide thin film was measured by quasi-static method. The piezoelectric property of zinc oxide thin film was stimulated by acoustic vibration generated by a flat motor vibrator. The biomimetic mineralization experiment was carried out to study the piezoelectric property of zinc oxide and the effect of different vibration time of the motor on CaP deposition. The results show that the ZnO thin films prepared by this method have good crystallinity, high purity and are mostly hexagonal sheets, with the length ranging from 200nm to 300nm, and the longitudinal piezoelectric constant d33 is 2.13-3.68pC•N-1. More CaP was deposited on the vibrating sample surface than on the non vibrating surface, and CaHPO4 and Ca3(PO4)2 were mostly used as the deposition products. The immersion sample that vibrated for 30s within 1h (12h in total) had the best deposition effect.