Toppling-sliding failure is a typical mode of deep-seated toppling failure. In this mode, massive collapsed rock masses form the main sliding body, which is sensitive to rainfall events and prone to instability under rainfall due to its unique slope structure. In the present study, based on the detailed investigation on the geology and deformation characteristics, we studied the deformation and failure mechanism of a large-scale deep-seated toppling in Nandongzi Village, Pingquan City, Hebei Province. We constructed an engineering geology model to describe the toppling-sliding failure under rainfall. In addition, based on the saturated–unsaturated seepage theory and using the SLOPE/W and SEEP/W modules in the GeoStudio software, we explored the seepage law and factors controlling the seepage failure of toppling-sliding under rainfall. From surface to interior, the slope can be divided into topplingalling zone, strong toppling zone, slight toppling zone, and non-deformation zone. The geological structure consisting of an upper strong slab and an underlying weak rock layer, controls the early deformation, and the deformation and failure mode is compressing-bending-toppling. Due to the influence of excavation and rainfall, the sliding movements occur along planar rupture planes in the toppling-falling zone in the later stage, during which the failure mode switches to creeping-cracking. At present, the stability of the slope is highly sensitive to rainfall. When the rainfall intensity exceeds 220 mm/day (50 years return period storm), the factor of safety will fall below 1.05 and subsequently the sliding failure may be triggered. Because of the difference in permeability characteristics between the toppling-falling zone and the strong toppling zone, high pore-water pressure is developed at their boundary, leading to a drastic decrease in the factor of safety. Specifically, the more considerable difference in permeability, the lower the safety factor. Overall, this study is significant in scientific guiding for evaluating and preventing such slope failures.

The Nandongzi landslide occurred in the Yanshan region of North China. From 2017, the slope of the Nandongzi landslide has been significantly deformed after several excavations. Field investigations show that the Nandongzi landslide is a special toppling deposit that does not have basic toppling conditions. The toppling deformation mechanism of the slope has become a difficult issue for engineers, attracting the attention of scientists. Joint, surface, and borehole lithology surveys revealed the surface and internal structural characteristics of the slope. The structure of the soft and hard interbedded rock and the proximity of the fault are the dominant factors of slope toppling deformation. The slope toppling failure process can be divided into four stages: initial deformation, compression and bending, toppling and overlapping, and reactivation. In the first three stages, slope toppling deformation is triggered by the downcutting of the upstream gully, gravity, and differential weathering of soft and hard rocks, which promote the dumping deformation of the slope. In the final stage, engineering excavations triggered the reactivation of residual deposits. Monitoring data indicate that slope deformation is directly related to rainfall events. Flac 3D was used to simulate the slope failure process under natural and rainfall conditions after the two excavations. The results show that multiple excavations changed the surface and runoff conditions of the slope, which led to slope failure. Rainfall promoted deformation of the back edge of the landslide, which led to shear failure from the back edge to the front edge. Our results provide new and unique understanding into the spatiotemporal evolution and deformation mechanism of similar toppling-accumulation landslides around the study area.