Farida Kapsalamova

Mrs. Farida Kapsalamova


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 August 2021 in Russian Metallurgy (Metally)
Verified
Journal Article
Closed access
PDF file
FKFarida Kapsalamova
Farida Kapsalamova
SKS. A. Krasikov
S. A. Krasikov
VZV. V. Zhuravlev
V. V. Zhuravlev
To investigate the possibility of preparation of a surfacing powder for gas-plasma facing, mechanochemical alloying of a mixture of Fe, Ni, Cr, Cu, B, and C powders is performed in a MPP-2-1K planetary mill for 15 min. To determine the chemical interaction between charge components and the sequence and character of formation of the phase composition in granulated alloys during mechanochemical alloying (MCA), X-ray diffraction (XRD) analysis of the powder material is performed using a D8 ADVANCE (BrukerElementalGmbH) diffractometer. The morphology of granules after mechanical alloying is studied by scanning electron microscopy (SEM) using a JEOLJXA-8230 scanning electron microscope. To determine the melting temperature of the prepared composition, thermal gravimetric analysis is carried out using a TG-DTA/DSC STA 449 F3 Jupiter (NETZSCH) synchronous thermal analyzer equipped with a quadrupole mass spectrometer. The experimental results of show that, upon mechanical activation of an Fe–Ni–Cr–Cu–Si–B–C composition, the formation of both stable and metastable phases takes place. It is found that, already after 1-min mechanochemical alloying, numerous new phases form; after 15-min alloying, a multiphase system forms, which includes intermetallics (Fe0.95Ni0.05, Cr1.07Fe18.93, etc.), carbides (Fe3C, Cr15.58Fe7.42C6, etc.), borides (Ni75Si24B0.04, etc.), and silicides (Ni0.92Si0.08, Cr5Si3). The main cause for the phase formation upon mechanochemical alloying is the shock action of milling bodies (balls), which results in the plastic deformation of starting component particles, their breaking, and welding along formed juvenile surfaces, which is accompanied by exothermic effects and the formation of intermediate liquid phases. As a result, the contact surface of the reagents abruptly increases and composite particles form. Upon shock action, complex and poorly understood chemical processes, diffusion of components, and phase- and structure-formation occur.

25 August 2021 in Russian Metallurgy (Metally)
Verified
Journal Article
Closed access
PDF file
FKFarida Kapsalamova
Farida Kapsalamova
SKS. A. Krasikov
S. A. Krasikov
Thermodynamic analysis of phase transformations of the multicomponent Fe–Ni–Cr–Cu–Si–C system is performed. It is of interest for the advanced metallothermic preparation technology of a wear-resistant alloy. To estimate the phase composition and structure of the alloy, computer calculations of characteristic vertical sections of the phase diagram are performed using the Thermo-Calc (TCW5 version) software; they are based on a digital simulation of phase equilibria using the CALPHAD method and the TTFe-Thermotech Fe-based Alloys Database, which includes data on chemical elements and is intended for the calculations of stable and metastable phases in multicomponent alloys. The phase transformations are considered at temperatures of 300 to 1400°C, a step of 100°C, and variable contents of Ni, Cr, Cu, Si, and C alloying elements. Vertical sections of the Fe–Ni–Cr–Cu–Si–C phase diagram are calculated, and the critical temperatures of the phase transformations of the alloy and chemical compositions of the formed phases (α, β, β2, γ, γ2, L) are determined. The thermodynamic simulation results show that, when an Fe-based alloy is alloyed, its microstructure becomes more complex and its phase composition changes; this situation takes place during gas-plasma facing. To study solidification to obtain quantitative information about the solidification stages of an alloy, the critical temperatures separating the stages, the composition and amount of precipitated phases, and the effect of temperature are determined. The temperature dependence of melt solidification exhibits a transition of nonequilibrium melt solidification to an equilibrium solidification stage at 950°C; this assumes a fine-grained structure of the coating. Thermodynamic analysis allows us to predict a ferrite–martensite structure of the coating with ledeburite inclusions during the preparation of a wear-resistant coating by metallothermic technology. The constructed vertical sections show that complete dissolution of all components in liquid occurs at ~1400°C.

1 August 2023 in Russian Metallurgy (Metally)
Verified
Journal Article
Closed access
PDF file
FKFarida Kapsalamova
Farida Kapsalamova
SKS. A. Krasikov
S. A. Krasikov
ATA. Zh. Terlikbaeva
A. Zh. Terlikbaeva
EZE. M. Zhilina
E. M. Zhilina
AAA. M. Alimzhanova
A. M. Alimzhanova
Calculation methods using combined GGA and GGA + U schemes (semiempirically tuned generalized gradient approximations) are applied to determine the thermochemical characteristics (enthalpy, molar heat capacity, Gibbs energy of formation) of silicides, borides and carbides in an alloy of the specified composition 40Fe–31Ni–16Cr–5Cu–5Si–2B–1C. Three modules of the HSC Chemistry 6.0 software package (Metso Outotec, version 6.0, Espoo, Finland) are used. First, the Reaction Equation module (Reaction Equations for the calculation of thermodynamic functions in the temperature range for individual substances or chemical reactions) is used to calculate a change in the free Gibbs energy at different temperatures. Second, the Equilibrium Composition module (Equilibrium Compositions for the calculation of equilibrium compositions of phases in the presence of reversible chemical reactions) is used to calculate the composition of each chemical substance in the equilibrium state. Third, the H, S, C, and G diagrams module (Graphs of Thermodynamic Functions aimed at plotting thermodynamic functions) is used to determine the relative phase stability of the compounds depending on temperature in the form of Ellingham diagrams. The thermochemical modeling results show that the heat capacities of formation of hardening compounds in the alloy increase with the temperature. The thermodynamic calculations of the enthalpies of the hardening phases in the alloy show that silicides, borides, and carbides form at temperatures >1400°C. An increase in the Gibbs energies and a tendency toward stability with increasing temperature are observed when considering ΔG(T) of silicides. Strong heat absorption and an increase in the Gibbs energy in the temperature range under study are observed for the formation of borides in the alloy. The calculation results for the Gibbs energy as a function of temperature demonstrate the formation of carbides Ni3C, Fe3C, SiC, B4C, Cr3C2, Cr4C, and Cr7C3. Aggregate and polymorphic transformations occur with a decrease in the Gibbs energy down to a temperature of ~1500°C. The absorption of thermal energy associated with a high temperature of carbide structure ordering is revealed with a further increase in temperature. Thus, the formation of silicides, borides, and carbides in the 40Fe–31Ni–16Cr–5Cu–5Si–2B–1C alloy is substantiated by the thermochemical study.

1 July 2023 in Расплавы
Verified
Journal Article
Closed access
PDF file
FKFarida Kapsalamova
Farida Kapsalamova
SKS. А. Krasikov
S. А. Krasikov
ATA. Zh. Terlikbayeva
A. Zh. Terlikbayeva
EZE. M. Zhilina
E. M. Zhilina
AAA. M. Alimzhanova
A. M. Alimzhanova
To determine thermochemical characteristics: enthalpy, molar heat capacity and Gibbs energy of formation of silicides, borides and carbides in an alloy of a given composition (40Fe–31Ni–16Cr–5Cu–5Si–2B–1C) calculation methods were used using mixed GGA and GGA + U schemes (semi-empirically tuned generalized gradient approximations). Three modules of the HSC Chemistry 6.0 software package (Metso Outotec, version 6.0, Espoo, Finland) were used in the study. First, the “Reaction Equation” module was used to calculate the change in Gibbs free energy at different temperatures. Secondly, to calculate the composition of each chemical in the equilibrium state, the module “Equilibrium Composition” was used (“Equilibrium compositions” – calculation of equilibrium compositions of phases in the presence of reversible chemical reactions). Thirdly, the module “H, S, C and G diagrams” (“Graphs of thermodynamic functions” – plotting thermodynamic functions) was used to determine the relative phase stability of compounds depending on temperature in the form of Ellingham diagrams. The results of thermochemical modeling showed that the temperature dependences of the heat capacity of the formation of hardening compounds in the alloy increase with increasing temperature. Thermodynamic calculations of the enthalpies of the hardening phases in the alloy showed that at temperatures 1400°C, silicides, borides, and carbides are formed. ∆G(T) of silicides, there is an increase in the values of the Gibbs energy and a tendency towards stability with increasing temperature. During the formation of borides in the alloy, one can see a strong absorption of heat, an increase in the Gibbs energy in the studied temperature range. The results of calculating the Gibbs energy as a function of temperature showed the formation of carbides Ni3C, Fe3C, SiC, B4C, Cr3C2, Cr4C, Cr7C3. The formation of phases occurs with a decrease in the values of the Gibbs energy to a temperature of ~1500°C. A further increase in temperature indicates the absorption of heat, which is associated with a high ordering temperature of the carbide structures. Thus, the thermochemical study justified the formation of silicides, borides, carbides in the alloy 40Fe–31Ni–16Cr–5Cu–5Si–2B–1C.

31 August 2023 in Tsvetnye Metally
Verified
Journal Article
Closed access
FKFarida Kapsalamova
Farida Kapsalamova
SKS. A. Krasikov
S. A. Krasikov
EZE. M. Zhilina
E. M. Zhilina
FBF. A. Berdikulova
F. A. Berdikulova
This paper describes a physico-chemical analysis of phase transformations at the Fe – C alloy — Fe – Ni – Cr – Cu – Si – B – C alloy interface, which is of interest in term of a promising metallothermic process that enables to obtain wear-resistant ultradispersed coatings for strengthening and restoring wornout parts of equipment. A Fe – Ni – Cr – Cu – Si – B – C powder, obtained by mechanochemical alloying, was gas-flame sprayed on an iron-carbon substrate. The aim of this study was to understand the physical and chemical transformations that occur when forming a wear-resistant coating aimed at strengthening and restoring worn-out parts of equipment. A propane-oxygen torch was used to perform gas-flame surfacing of a sample steel grade 45 substrate. An X-ray phase analysis was carried out, and images were produced on a scanning electron microscope when examining the physico-chemical properties of the Fe – C alloy — Fe – Ni – Cr – Cu – Si – B – C alloy interface. The results show that the Fe – C alloy — Fe – Ni – Cr – Cu – Si – B – C alloy interface consists of multiple phases, including intermediate phases, intermetallic compounds (CrNi3, Fe10.8Ni, etc.), carbides (Fe3C, (Cr, Fe)23C6, etc.), borides (Ni2B, Cr5B3, etc.), silicides (FeSi2, Cr5Si3, etc.). Such phase formation during gas-flame surfacing can be primarily attributed to complex processes of chemical interaction, diffusion and structure formation that occur due to temperature impact and are accompanied by an exothermic effect. The SEM images illustrate a non-uniform distribution of alloying elements between ultradispersed phases.This research was carried out under a governmental assignment by the Institute of Metallurgy at the Ural Branch of the Russian Academy of Sciences; Subject Registration No.: 122020100404-2.