The aerodynamic design of rotor blades is challenging, and is crucial for the development of helicopter technology. Previous aerodynamic optimizations that focused only on limited design points find it difficult to balance flight performance across the entire flight envelope. This study develops a global optimum envelope (GOE) method for determining blade parameters—blade twist, taper ratio, tip sweep—for optimum rotor speed helicopters (ORS-helicopters), balancing performance improvements in hover and various freestream velocities. The GOE method implements aerodynamic blade design by a bi-level optimization, composed of a global optimization step and a secondary optimization step. Power loss as a measure of rotor performance is chosen as the objective function, referred to as direct power loss (DPL) in this study. A rotorcraft comprehensive code for trim simulation with a prescribed wake method is developed. With the application of the GOE method, a DPL reduction of as high as 16.7% can be achieved in hover, and 24% at high freestream velocity.
The variable-speed rotor has proven to be a promising means to improve helicopter performance. Previous investigations on the aeromechanics of the variable-speed rotor are scarce. This work studies the mechanism of the variable-speed rotor affecting the rotor aerodynamic performance by means of dimensionless parameter analysis and reveals the various effect mechanisms under the various flight speeds and take-off weights. The current work shows that, during hover, the variable-speed rotor improves the rotor aerodynamic performance by reducing the blade dynamic pressure, while the non-uniform thrust distribution is attributed to the reduced rotor speed suppresses the performance improvement. In slow forward flight, the blade dynamic pressure reduction improves the rotor aerodynamic performance. In cruise and fast forward flight, both the blade dynamic pressure and advancing blade tip compression loss reductions improve the rotor aerodynamic performance. The study also shows that in forward flight, the rotor loading is smaller, and the effect of reducing the advancing blade tip compression loss through the variable-speed rotor is greater.