The possibility of measuring multi-material components, while assessing inner and outer features simultaneously makes X-ray computed tomography (CT) the latest evolution in the field of coordinate measurement systems (CMSs).However, the difficulty in selecting suitable scanning parameters and suitable surface determination settings, limits a better acceptance of CT as a CMS. Moreover, standard CT users are subject to the algorithms and boundary conditions implied by the use of commercial analysis software.In this context, this paper is concerned with the experimental evaluation of the influence of surface determination process on multi-material measurements, using functions available in the commercial CT data analysis software Volume Graphics VGStudio Max 2.2.6.Calibrated step gauges made of different materials, i.e. PEEK, PPS, and Al were used as reference standards. The step gauges were assembled in such a way as to have different multi-material X-ray absorption ratios. Comparative measurements of mono-material assemblies were performed as well. Different segmentation processes were considered (e.g. ISO-50%, local threshold, region growing, etc.), patch-based bidirectional length analyses were carried out to perform in-material measurements on the assemblies.This work discusses the different approaches based on real CT scans, and aims to provide advice on the segmentation process for multi-material measurements
1 January 2016 in CIRP Journal of Manufacturing Science and Technology
Ever since the invention of plastics, packaging has become extremely cheap and efficient. In recent times, the demand for more ecological packaging is increasing leading back to the roots of using naturally available resources, which are biodegradable. The manufacturing process of the Green Fiber Bottle (GFB) is based on moulding of wood fibers. The process is still at the research stage and not commercialized. Tooling is the most critical element in moulding and should be adapted to quick water removal techniques, such as Impulse Drying Technology. In this work, functional requirements for the development of a robust tooling solution are identified. Tooling alternatives are investigated and compared with the capacity to enable water removal. Characterization and assessment of porous tool materials using computed tomography are also outlined and discussed.
This paper evaluates and quantifies the repeatability of post-processing settings, such as surface determination, data fitting, and the definition of the datum system, on the uncertainties of Computed Tomography (CT) measurements. The influence of post-processing contributions was determined by calculating the standard deviation of 10 repeated measurement evaluations on the same data set. The evaluations were performed on an industrial assembly. Each evaluation includes several dimensional and geometrical measurands that were expected to have different responses to the various post-processing settings. It was found that the definition of the datum system had the largest impact on the uncertainty with a standard deviation of a few microns. The surface determination and data fitting had smaller contributions with sub-micron repeatability