We examined the effect of the structure of corrosion inhibitors benzotriazole (BTA) and 1,2,4-triazole (TAZ) on the Cu removal rate during chemical mechanical planarization. Removal rates were higher for solutions containing TAZ than solutions containing BTA. Corrosion inhibitor films were characterized using atomic force microscopy, cyclic voltammetry, impedance spectroscopy, surface-enhanced Raman spectroscopy, and mass spectrometry. Inhibitor films formed from TAZ were thicker, more permeable, and rougher than films formed from BTA. The addition of glycine to the corrosion inhibitor containing solutions showed an increase in corrosion for the TAZ-covered Cu surface, little change for the BTA-covered surface, and an increase in removal rate for both systems. This study correlates removal rate with the physical properties of these two different corrosion inhibitors.
1 February 2021 in ECS Journal of Solid State Science and Technology
As feature sizes continue to shrink well beyond the 7 nm node, understanding the delicate balance present in the chemical mechanical planarization (CMP) process is of utmost importance. In order to achieve high through-put and defect-free CMP processes it is critical to develop predictive analytical techniques that directly correlate to macroscopic STI CMP performance metrics (i.e. oxide/nitride removal, defectivity, and dishing/erosion). This work employed a suite of techniques to monitor the CeO2 nanoparticle interfacial redox processes in the presence of structurally diverse rate modulating additives. Specifically, utilizing a UV–vis spectroscopic technique, the Ce3+/Ce4+ ratio in the presence of different slurry additives was monitored and proved to directly correlate to removal rate performance (i.e. an increase in Ce3+/Ce4+ ratio shows an increase in rate). This finding coupled with the rate of dissolved O2 evacuation and a modified QCM technique determined the mode of interaction/adsorption which validates that the mechanism of oxide removal does not strictly depend on redox capacity, but also depends on the dynamic O2 equilibrium at the CeO2 nanoparticle surface. It was determined that the modulation of oxide removal was directly related to the distribution of interactions (i.e. steric vs redox) and was highly dependent on the slurry additive functionality.