Most surfaces in the marine environment, both biotic and abiotic, are subject to biofouling. This has significant consequences for the safe and efficient conduct of marine activities. There is a pressing need to develop environmentally and economically acceptable methods to control the problem. In nature most plants and animals have evolved techniques that prevent or limit the process of fouling. These include chemical, physical, mechanical and behavioral responses. This paper reviews the knowledge with respect to natural antifouling methods, discusses similarities between natural mechanisms and existing antifouling technology and identifies potential future bioinspired approaches for the prevention of hull fouling specifically as they apply to US Navy requirements.

Data from short-term biofouling assays are frequently used to evaluate the performance of antifouling (AF) coatings. There are a large number of factors, however, that may influence community development. One such factor is colour. The hypothesis was that differences in colour may impact the short-term development of a biofouling community and therefore bias the results. An experiment was designed to investigate the effect of black and white substrata on settlement of fouling organisms in the field. Both Ulva sp. and Spirorbis sp. had significantly higher settlement on black surfaces. This result emphasises the importance of considering colour and other factors when undertaking short-term testing of AF coatings.

A series of eight novel siloxane-polyurethane fouling-release (FR) coatings were assessed for their FR performance in both the laboratory and in the field. Laboratory analysis included adhesion assessments of bacteria, microalgae, macroalgal spores, adult barnacles and pseudobarnacles using high-throughput screening techniques, while field evaluations were conducted in accordance with standardized testing methods at three different ocean testing sites over the course of six-months exposure. The data collected were subjected to statistical analysis in order to identify potential correlations. In general, there was good agreement between the laboratory screening assays and the field assessments, with both regimes clearly distinguishing the siloxane-polyurethane compositions comprising monofunctional poly(dimethyl siloxane) (PDMS) (m-PDMS) as possessing superior, broad-spectrum FR properties compared to those prepared with difunctional PDMS (d-PDMS). Of the seven laboratory screening techniques, the Cellulophaga lytica biofilm retraction and reattached barnacle (Amphibalanus amphitrite) adhesion assays were shown to be the most predictive of broad-spectrum field performance.

The influence of zwitterionic self-assembled monolayers on settlement and removal of algae was studied. The monolayers were constructed either from zwitterionic thiols or from solutions of positively and negatively charged thiols. The cationic component was composed of quaternary ammonium terminated thiols and the anionic component contained sulfate or carboxylate termination. During assembly, all surfaces showed a strong tendency for equilibration of the surface charge. Settlement and adhesion assays with zoospores of Ulva linza and the diatom Navicula incerta, and field tests of the initial surface colonization revealed the relevance of charge equilibration for the biological inertness of the prepared surfaces.

Biofouling on ships has been linked to the spread of invasive species, which has been identified as one of the current primary threats to the environment. Previous research on antifouling coatings suggested that the quantity of fouling, as well as community composition, on biocidal coatings was modified by prior fouling settlement. The experiment reported in this paper was designed to determine how preconditioning affected the rate and composition of subsequent fouling on transplanted silicone coatings. A series of 10 × 20 cm panels coated with Intersleek 700 or DC3140 were placed at three locations in Florida (Ponce Inlet, Sebastian Inlet, and Port of Miami), which were characterized by distinct fouling communities. Panels were immersed for four months, cleaned, and reciprocally transplanted among the three sites. Fouling community composition and coverage were characterized at bimonthly intervals both before and after transplantation. The original fouling community affected the subsequent fouling composition and recolonization by tunicates, sea anemones, barnacles, sponges, hydroids, and arborescent bryozoans. The community-level effects were short-term, lasting 2–4 months, but specific responses lasted up to 14 months post-transplant.