In this study, a numerical model of the tangential tensioning stress distribution of a circular saw blade tensioned by multi-spot pressure was established using theoretical analysis, and the tangential tensioning stress distribution of the circular saw blade calculated by the model was shown to be true and reliable. The effect of yield strength of the circular saw blade on the distribution of tangential tensioning stress was studied using the numerical model. The research achievements showed that a circular saw blade made with high-strength or ultra-high-strength steel yielded a better tensioning effect during the multi-spot pressure tensioning process, which could promote the application of a circular saw blade made by high-strength or ultra-high-strength steel.
4 November 2023 in European Journal of Wood and Wood Products
Tensioning, as a plastic forming process, is the most important and advanced manufacturing process for circular saw blade. Multi-spot pressure tensioning is a new tensioning method that has been proposed and applied in recent years. However, the effects of process parameters of this method on tensioning effect of circular saw blade have not been systematically studied. This study aimed to examine the effects of loading force and spot distribution on tensioning stress field and natural frequencies of multi-spot pressure tensioned circular saw blade systematically. Both of these were calculated by a combination of dynamic/explicit, static/general, and frequency modules of ABAQUS software. An X-ray stress test validated the simulated tensioning stress field. Results show that loading force and spot distribution have effects on tensioning stress field and natural frequencies of circular saw blades with different extents.
In this paper, 3D roll tensioning elastoplastic model was built by finite element method and the research object was a common circular saw blade body with hole, slot, and scraper structure. The theoretical calculation results show that there are areas dominated by tangential compressive stress near slot and scraper of roll tensioned saw blade body, which is not the expected result. It is proved that residual stress of saw blade body can be regulated by combining roll tensioning and local plastic compression process in this paper. The theoretical calculation results show that the outer edge of saw blade body near slot and scraper becomes area dominated by tangential tensile stress after the improved tensioning process. The improved tensioning process has little effect on stiffness and waist strength of circular saw blade.