Hydraulic flushing can increase the efficiency of gas extraction by artificially modifying the coal reservoir. Considering the plastic failure of coal mass, an improved gas–liquid–solid coupling model for hydraulic flushing and gas extraction is constructed. The parameter evolution in the hydraulic flushing process was numerically investigated to determine the optimal borehole arrangement of hydraulic flushing. The results show that the relative permeability of gas gradually increases with the initial dewatering. The gas rates of both regular extraction and hydraulic flushing enhanced extraction show an increasing–decreasing trend. An increased and delayed peak gas rate is observed comparing with the regular extraction, caused by the hydraulic flushing induced new fractures. The area around of borehole is divided into the failure zone, the plastic softening zone, and the elastic zone after hydraulic flushing. The failure zone has the greatest increase in coal permeability, followed by the plastic softening zone, while the elastic zone keeps no significant change. The larger difference between the horizontal stress and vertical stress, the more obvious the elliptical shape of the permeability change area near the borehole, as well as the pressure drop in the elliptical zone. With the increase in the hydraulic flushing radius, the permeability increasing zone and gas pressure decreasing zone gradually increase. Subsequently, the equivalent effective radius and equivalent influencing radius were obtained, as well as the optimal borehole spacing for hydraulic flushing by cross-layer drilling. Finally, the optimal borehole spacing is obtained for different borehole diameters and efficient extraction times. These provide a theoretical guidance for field application of hydraulic flushing in a low-permeable coal seam.
The harmful gas in the sealed fire area of a small coal mine rushes into the mining face of the lower coal seam, which restricts the efficient promotion of the working face. In this paper, based on the evolution law of caving coal rock dilatation coefficient, the characteristics of the heterogeneous distribution of permeability and voidage in goaf were obtained, and the mathematical model of gas migration in goaf is constructed. The numerical solution of gas migration in goaf under the sealed fire area of a small coal mine was realized by using the Free and Porous Media Flow module and the Transport of Dilute Matter in Porous Media module in COMSOL Multiphysics, and the corresponding measure was proposed. The results show that the fresh air flows into the goaf from both the inlet air roadway and the working face and then flows out from the upper corner. Driven by the air flow, the CO in the overlying sealed fire area of a small coal mine flows out from the upper corner of the working face, resulting in the CO overlimit. Due to the influence of air leakage and the CO overlimit in the working face, low oxygen occurs in the working face. According to the characteristics of gas emission, balanced pressure ventilation technology is proposed to control the low oxygen in the working face and the CO overlimit in the upper corner. It is found that the balanced pressure ventilation obviously increases the pressure of the working face, reduces the pressure difference between the two ends of the working face by 45.7–26.7%, and decreases the air leakage to the goaf in the upper corner of the inlet air roadway. The field application shows that the problems of low oxygen in the working face and a CO overlimit in the upper corner are effectively solved.