The aim of this work was to verify the behavior of hybrid hardwood glue-laminated beams and the possibility of replacing Norway spruce (Picea abies) construction elements, especially in roof and ceiling structures. The samples were six lamellae homogeneous beech (Fagus sylvatica) beams and six-lamellae hybrid beech-poplar (Fagus sylvatica–Poplar spp.) beams; each beam had a cross-section of 60 × 120 mm and was glued with polyurethane adhesive. The samples were loaded using destructive four-point bending tests according to EN 408; the obtained bending strength and modulus of elasticity were statistically evaluated and compared to each other in both types of samples. The results showed that the examined properties of the hybrid beams (with a 16% weight reduction) are comparable to the properties of homogeneous beech glue-laminated beams. Based on the obtained data, the timber elements that are currently used can be successfully replaced by hardwood glue-laminated elements. Based on their higher load-bearing capacity, the cross-section depth can be reduced compared to a larger cross-section depth in spruce beams; this means that hardwood could be suitable in building renovations.

The article presents current research results in the field of airflow through a façade with a width of 1 m and a height of 13.7 m and with a ventilated gap, and its effect on the year-round heat balance of this façade. An idea to influence airflow in the ventilated gap of the façade is presented based on the results of developed software and the suitability of closing the air gap in winter and in the transition period of the year is described. First, the boundary conditions of the calculations, which are further used in the energy balance between the interior of the building and the exterior environment are defined. In order to include these influences, a discrete analytical calculation was created. It consists of the time distribution of the investigated thermal phenomena calculations. A significant finding is an obvious benefit of controlling the airflow through a ventilated gap in the winter and especially in the transitional period of the year. This technological knowledge has a high potential for energy savings related to the heating of buildings. As the calculations show, airflow control through a ventilated façade reduces heat flow by 25–30% on average, and in contrast, it increases heat gains by 20% and the specific values are presented within the article.

Apart from gradually disappearing spruce wood, hardwood, particularly beech, oak, hornbeam, and maple, will be among the future local wood sources in the Central Europe. A multiple criteria analysis, PROMETHEE method, was used in order to select the most suitable hardwood for construction purposes. Apart from the forest land area criterion, seven other evaluation criteria were selected including physical and mechanical properties of individual hardwood species. Some of the properties in question were experimentally determined and verified. All alternatives were compared and their ranking was determined based on the use of PROMETHEE II method. The result is a single hardwood species whose use in civil engineering appears to be the most suitable in terms of the selected criteria. In addition, the influence of selected weights of individual criteria on the decision making process is discussed.