With the advent of self-driving vehicles, autonomous driving systems will have to rely on a vast number of heterogeneous sensors to perform dynamic perception of the surrounding environment. Synthetic Aperture Radar (SAR) systems increase the resolution of conventional mass-market radars by exploiting the vehicle’s ego-motion, requiring very accurate knowledge of the trajectory, usually not compatible with automotive-grade navigation systems. In this setting, radar data are typically used to refine the navigation-based trajectory estimation with so-called autofocus algorithms. Although widely used in remote sensing applications, where the timeliness of the imaging is not an issue, autofocus in automotive scenarios calls for simple yet effective processing options to enable real-time environment imaging. This paper aims at providing a comprehensive theoretical and experimental analysis of the autofocus requirements in typical automotive scenarios. We analytically derive the effects of navigation-induced trajectory estimation errors on SAR imaging, in terms of defocusing and wrong targets’ localization. Then, we propose a motion estimation and compensation workflow tailored to automotive applications, leveraging a set of stationary Ground Control Points (GCPs) in the low-resolution radar images (before SAR focusing). We theoretically discuss the impact of the GCPs position and focusing height on SAR imaging, highlighting common pitfalls and possible countermeasures. Finally, we show the effectiveness of the proposed technique employing experimental data gathered during open road campaign by a 77 GHz multiple-input multiple-output radar mounted in a forward-looking configuration.

In this paper, we discuss the possibility of generating high-resolution mapping of urban (or extra-urban) environments by the application of synthetic aperture radar (SAR) processing concepts to the data collected by mm-wave automotive radars installed on-board commercial vehicles. The study is motivated by the fact that radar sensors are becoming an indispensable component of the equipment of modern vehicles, being characterized by low cost, good performance, and affordable processing; therefore, in the future, nearly every single vehicle could be potentially equipped with radar devices capable of high-resolution imaging, enabled by application of SAR processing methodologies. Throughout this paper, we aim to discuss the role of SAR imaging in the automotive context under a theoretical and experimental perspective. First, we present the resulting benefits in terms of angular resolution and signal-to-noise ratio. Then, we discuss relevant technological aspects, such as suppression of angular ambiguities, fine estimation of platform motion, and SAR processing architectures, and we present a preliminary evaluation of the required computational costs. Finally, we will present a number of experimental results based on open road campaign data acquired using an 8-channel MIMO radar at 77 GHz, considering the cases of side-looking SAR, forward SAR, and SAR imaging of moving targets.

Synthetic Aperture Radar (SAR) imaging is starting to play an essential role in the automotive industry. Its day and night sensing capability, fine resolution, and high flexibility are key aspects making SAR a very compelling instrument in this field. This paper describes and compares three algorithms used to combine low-resolution images acquired by a Multiple-Input Multiple-Output (MIMO) automotive radar to form an SAR image of the environment. The first is the well-known Fast Factorized Back-Projection (FFBP), which focuses the image in different stages. The second one will be called 3D2D, and it is a simple 3D interpolation used to extract the SAR image from the Range-Angle-Velocity (RAV) data cube. The third will be called Quick&Dirty (Q&D), and it is a fast alternative to the 3D2D scheme that exploits the same intuition. A rigorous mathematical description of each algorithm is derived, and their limits are addressed. We then provide simulated results assessing different interpolation kernels, proving which one performs better. A rough estimation of the number of operations proves that both algorithms can be deployed using a real-time implementation. Finally, we will present some experimental results based on open road campaign data acquired using an eight-channel MIMO radar at 77 GHz, considering the case of a forward-looking geometry.

This paper proposes a method for efficient and accurate removal of grating lobes in automotive Synthetic Aperture Radar (SAR) images. Grating lobes can indeed be mistaken as real targets, inducing in this way false alarms in the target detection procedure. Grating lobes are present whenever SAR focusing is performed using data acquired on a non-continuous basis. This kind of acquisition is typical in the automotive scenario, where regulations do not allow for a continuous operation of the radar. Radar pulses are thus transmitted and received in bursts, leading to a spectrum of the signal containing gaps. We start by deriving a suitable reference frame in which SAR images are focused. It will be shown that working in this coordinate system is particularly convenient since it allows for a signal spectrum that is space-invariant and with spectral gaps described by a simple one-dimensional function. After an inter-burst calibration step, we exploit these spectral characteristics of the signal by implementing a compressive sensing algorithm aimed at removing grating lobes. The proposed approach is validated using real data acquired by an eight-channel automotive radar operating in burst mode at 77 GHz. Results demonstrate the practical possibility to process a synthetic aperture length as long as up to 2 m reaching in this way extremely fine angular resolutions.

In this paper, a computationally light single-snapshot multiple signal classification (MUSIC) algorithm is presented for multidimensional estimation in the framework of automotive radar systems. In particular, for the sake of simplicity, we focus on the two-dimensional (2D) range-angle processing. The goal is to reduce the computational effort with respect to the standard 2D MUSIC implementation and to improve the resolution which can be obtained by classical Fourier transform processing. To this end, the decorrelation step, commonly achieved by standard 2D spatial smoothing strategy, is replaced by straight-way arranging the data to form a block Toeplitz matrix whose blocks are Toeplitz matrices. The corresponding 2D eigenspectrum is employed to derive the one-dimensional (1D) signal subspaces which are used to build two 1D MUSIC peseudospectra for estimating targets' ranges and angles, separately. The association problem is then resolved by computing the 2D MUSIC pseudospectrum only for a few search points arising from the combinations of the estimated ranges and angles. Numerical and experimental results show that the proposed algorithm improves the resolution (compared to the Fourier Transform) with a dramatic reduction of the computational burden (compared to the standard MUSIC).

This paper addresses a number of technological and theoretical aspects of employing the Substrate Integrated Waveguide (SIW) technology in the design and implementation of the antenna section of different communication systems operating at millimeter-wave (mm-W) frequencies. An SIW-oriented design presents a number of immediate advantages, such as a massive reduction in system complexity, antenna isolation enhancement, and low-cost implementation. Moreover, the SIW technology permits to adopt a number of antenna topologies featuring several advantages in terms of reconfigurability and dynamic performance, which becomes extremely beneficial in the synthesis of modern phased array configurations.