A seeded growth method for the fabrication of high-permeance, high-separation-factor zeolite (siliceous ZSM-5, [Si 96 O 192 ]-MFI) membranes is reported. The method consists of growing the crystals of an oriented seed layer to a well-intergrown film by avoiding events that lead to a loss of preferred orientation, such as twin overgrowths and random nucleation. Organic polycations are used as zeolite crystal shape modifiers to enhance relative growth rates along the desirable out-of-plane direction. The polycrystalline films are thin (∼1 micrometer) with single grains extending along the film thickness and with large in-plane grain size (∼1 micrometer). The preferred orientation is such that straight channels with an open diameter of ∼5.5 angstroms run down the membrane thickness. Comparison with previously reported membranes shows that these microstructurally optimized films have superior performance for the separation of organic mixtures with components that have small differences in size and shape, such as xylene isomers.
1 March 2013 in Journal of the American Chemical Society
Pyrolytic biofuels have technical advantages over conventional biological conversion processes since the entire plant can be used as the feedstock (rather than only simple sugars) and the conversion process occurs in only a few seconds (rather than hours or days). Despite decades of study, the fundamental science of biomass pyrolysis is still lacking and detailed models capable of describing the chemistry and transport in real-world reactors is unavailable. Developing these descriptions is a challenge because of the complexity of feedstocks and the multiphase nature of the conversion process. Here, we identify ten fundamental research challenges that, if overcome, would facilitate commercialization of pyrolytic biofuels. In particular, developing fundamental descriptions for condensed-phase pyrolysis chemistry (i.e., elementary reaction mechanisms) are needed since they would allow for accurate process optimization as well as feedstock flexibility, both of which are critical to any modern high-throughput process. Despite the benefits to pyrolysis commercialization, detailed chemical mechanisms are not available today, even for major products such as levoglucosan and hydroxymethylfurfural (HMF). Additionally, accurate estimates for heat and mass transfer parameters (e.g., thermal conductivity, diffusivity) are lacking despite the fact that biomass conversion in commercial pyrolysis reactors is controlled by transport. Finally, we examine methods for improving pyrolysis particle models, which connect fundamental chemical and transport descriptions to real-world pyrolysis reactors. Each of the ten challenges is presented with a brief review of relevant literature followed by future directions which can ultimately lead to technological breakthroughs that would facilitate commercialization of pyrolytic biofuels.
Single-use plastics impose an enormous environmental threat, but their recycling, especially of polyolefins, has been proven challenging. We report a direct method to selectively convert polyolefins to branched, liquid fuels including diesel, jet, and gasoline-range hydrocarbons, with high yield up to 85% over Pt/WO3/ZrO2 and HY zeolite in hydrogen at temperatures as low as 225°C. The process proceeds via tandem catalysis with initial activation of the polymer primarily over Pt, with subsequent cracking over the acid sites of WO3/ZrO2 and HY zeolite, isomerization over WO3/ZrO2 sites, and hydrogenation of olefin intermediates over Pt. The process can be tuned to convert different common plastic wastes, including low- and high-density polyethylene, polypropylene, polystyrene, everyday polyethylene bottles and bags, and composite plastics to desirable fuels and light lubricants.