Neogene plains around the Mediterranean basin are characterized by considerable groundwater salinization. Some studies have misidentified seawater intrusion as the main source of salinity. Across northern Morocco, we gathered δ18OSO4 and δ34SSO4 data from coastal and inland aquifers, Messinian marls, and volcanic products. Differences in the isotopic composition between Messinian marls and some groundwater in all aquifer samples indicate that salinization in groundwater is a consequence of dissolution of Messinian evaporite deposits; nevertheless, modern agriculture and wastewater strongly influence depletion in levels of δ34SSO4. Our novel approach enables effective investigation of processes governing salinity in Neogene basins to support more informed water resource management and governance.
Shear-wave seismic reflection velocity-versus-depth models can complement our understanding of seepage pore pressure variations beneath earthen levees at locations between geotechnical sites. The seasonal variations of water level in the Mississippi River create pore pressure changes in the adjacent hydraulically connected aquifer on the protected side of artificial levees. Time-lapse shear-wave velocity analysis or repetition of seismic acquisition over an area is a non-invasive method that can detect seasonal pore pressure variations in shallow (<40 m) aquifers. The seismic reflection patterns during the seasonal pore pressure variations of the river show a distinctive change in the velocity semblance analysis, which is translated as a change in the average stress carried by the grain-to-grain contact, or simply the effective pressure. The seismic data show a greater variation of up to +140/−40 m/s or +700/−150 kPa in the confined aquifer zone, compared with the leaky confined aquifer zone of up to +46/−48 m/s or +140/−80 kPa. These relative effective pressure characteristics allow us to distinguish between confined and leaky aquifers and can be an optional approach for pressure prediction in floodplains along levees without the need to drill borings in the area to measure piezometric data.
Knowledge of homogeneous and heterogeneous fluid-distribution conditions in unconsolidated sediments is important for the selection of remediation techniques for groundwater contamination. However, for unconsolidated sediments, fluid-distribution conditions from laboratory tests on core samples may not be representative of in situ conditions. We have developed a seismic inversion method to determine in situ fluid-distribution conditions that involves inverting experimental seismic P- and S-wave velocities using Hertz-Mindlin and Biot-Gassmann models with different averaging methods (Wood and Hill averages) and different fluid-distribution condition assumptions. This method can determine whether seismic velocity-versus-depth profiles are better explained assuming heterogeneous or homogeneous saturation conditions in shallow ( depth) unconsolidated sands. During the imbibition and drainage of shallow unconsolidated sands, we have observed nonmonotonic relationships between P-wave velocity and water levels (WLs) as well as an S-wave velocity and WLs that were consistent with other field and laboratory observations. This relationship can be explained by transitions between the lower Wood bound and the higher Hill bound. The transition is possibly caused by the alternation in the size of fluid patches between small and large during the imbibition and drainage. Inverted results can be verified by a good correlation (difference ) between the inverted and measured water saturation using moisture sensors.