Despite the high potential for microplastics (MPs) pollution in Bangladesh, the presence of MPs in the industrial region has largely been unexplored in Bangladesh. So, this study was conducted to determine whether MP pollution is prevalent in the industrial soil of Bangladesh and the extent of its toxicity. To examine MPs, a total of 12 soil samples were collected from the industrial region of Narayanganj, and a stereoscopic microscope was used to visually identify the MPs. Prior to that the technique of density separation and sieving was applied to extract MPs from those 12 soil samples. Among the twelve investigated samples, a total of 151 MPs (Mean: 12.6 ± 7.9 particles kg⁻¹) were identified, which were mostly white and ranged in size from 0.5 to 1 mm. Different types of MPs according to their shapes such as fibers (60.3%), fragments (19.2%), films (10.6%), and foam (9.9%) have been detected. 7 MPs (Mean: 0.58 ± 0.79) have been found in 3 urban farmland sites, 15 MPs (Mean: 1.87 ± 1.81) in two near metropolitan areas, and 129 MPs (Mean: 4.6 ± 4.39) in 7 industrial locations. Five polymers were identified by μ-FTIR, among which Polyamide predominated, followed by Polypropylene. According to risk assessments, the region falls under hazard categories II and III, suggesting a moderate to high risk. This paper gives thorough information on the toxicity of MP in an industrial location; therefore, it may be useful in the development of effective methods to address environmental issues.

Groundwater is a vital source of fresh water for drinking and agricultural purposes in the region of Hatiya Island, Bangladesh, yet it is subject to contamination by natural and anthropogenic activities. Over time, the contamination has resulted in a variety of negative effects on human health. This research aims to examine groundwater hydrogeochemical characterization and suitability for irrigation and drinking purposes on different indices utilizing a combined geochemical method, multivariate statistical approaches, and geospatial analysis. Results of hydrogeochemical analyses of 15 groundwater samples from the intermediate aquifer (60–90 m depth) represent the order of cations, anions, and metal concentrations as Na⁺ > Mg²⁺ > Ca²⁺ > K⁺, Cl⁻ > SO₄²⁻ > HCO₃⁻ > NO₃⁻, and Fe > I > Br > Mn > As, respectively. Saltwater intrusion has been determined to be the most important hydrogeochemical process influencing the chemistry of groundwater. Principal component analysis, Pearson’s correlation matrix, and hierarchical cluster analysis indicate that groundwater quality is highly governed by geogenic influences. This information has been evaluated using a drinking water quality index map, which found that six (40%) of the groundwater samples are suitable for human consumption, whereas the other nine (60%) are unfit for drinking. The analysis of irrigation quality parameters revealed that eight (54%) of the groundwater samples are in excellent or good condition for agricultural uses; however, the other seven (46%) samples are unsuitable.

Pollution generated by microplastics (MPs) has become an issue of global concern because to its severe effects on the general health of the ecosystem, especially the health of the terrestrial environment. There is a scarcity of data based on MP contamination research in Bangladesh that is currently available, and no work on MP contamination has previously been done in an industrial region of Bangladesh. As a result, this research was undertaken with the aim of determining whether or not MP contamination is present in the industrial area of the Barapukuria region in Bangladesh. The method of sieving and density separation was used in the process of extracting MPs from a total of 12 soil samples that were collected from the industrial area of Barapukuria. A stereomicroscope was utilized to accomplish the visual identification of the MPs. The method of sieving and density separation was used in the process of extracting MPs from 12 soil samples that were gathered from the industrial area of Barapukuria. A stereomicroscope was utilized in order to accomplish the visual identification of the MPs. The concentration of MPs accounted for 1–15 items/100g (Mean: 6.75 ± 5.3) in the 12 sampled regions, mostly white in color and ranging in size from 0.5–1 mm. Fibers have been found to be the most prevalent among the detected MPs (films, fiber, foam, and fragments). 8-types of MPs (Mean: 0.32 ± 0.69) were detected in 5 rural farmland locations, 11 MPs (Mean: 1.1 ± 1.73) in 2 sub-urban farmland sites, 11 MPs (Mean: 2.2 ± 3.19) in 1 urban farmland site, 24 MPs (Mean: 2.4 ± 1.89) in 2 industrial locations, and 27 MPs (Mean: 2.7 ± 3.05) in 2 near metropolitan areas. Based on the land use land cover analysis, higher contamination of MPs have been detected in the industrial and coal mine region of Barapukuria whereas relatively lower amount of MPs have been found in the rural and urban regions.