Bacterial attachment to material surfaces can lead to the development of biofilms that cause severe economic and health problems. The outcome of bacterial attachment is determined by a combination of bacterial sensing of material surfaces by the cell and the physicochemical factors in the near-surface environment. This paper offers a systematic review of the effects of surface topography on a range of antifouling mechanisms, with a focus on how topographical scale, from micro- to nanoscale, may influence bacterial sensing of and attachment to material surfaces. A good understanding of these mechanisms can facilitate the development of antifouling surfaces based on surface topography, with applications in various sectors of human life and activity including healthcare, food, and water treatment.

Background/Objectives: Prevention of biofilm formation by bacteria is of critical importance to areas that directly affect human health and life including medicine, dentistry, food processing and water treatment. This work showcases an effective and affordable solution for reducing attachment and biofilm formation by several pathogenic bacteria commonly associated with foodborne illnesses and medical infections. Methods: Our approach exploits anodisation to create alumina surfaces with cylindrical nanopores with diameters ranging from 15 to 100 nm, perpendicular to the surface. The anodic surfaces were evaluated for attachment by Escherichia coli, Listeria monocytogenes, Staphylococcus aureus and Staphylococcus epidermidis. Cell–surface interaction forces were calculated and related to attachment. Results: We found that anodic alumina surfaces with pore diameters of 15 and 25 nm were able to effectively minimise bacterial attachment or biofilm formation by all the microorganisms tested. Using a predictive physicochemical approach on the basis of the extended Derjaguin and Landau, Verwey and Overbeek (XDLVO) theory, we attributed the observed effects largely to the repulsive forces, primarily electrostatic and acid–base forces, which were greatly enhanced by the large surface area originating from the high density, small-diameter pores. We also demonstrate how this predictive approach could be used to optimise different elements of surface topography, particularly pore diameter and density, for further enhancing the observed bacteria-repelling effects. Conclusions: We demonstrate that anodic nanoporous surfaces can effectively reduce bacterial attachment. These findings are expected to have immediate, far-reaching implications and commercial applications, primarily in health care and the food industry.

Vapor-deposited polymer thin films empower the next-generation biological applications including bio-separations, biosensors & bio-MEMS, drug delivery and tissue engineering.

An imidazolium-based zwitterionic polymer is reported with dual functions of antivirus and antifouling with broad applicability.

Irradiation with deep-ultraviolet light-emitting diodes (DUV LEDs) is emerging as a low energy, chemical-free approach to mitigate microbial contamination, but the effect of surface conditions on treatment effectiveness is not well understood. Here, inactivation of L. innocua and E. coli ATCC25922, as examples of Gram-positive and Gram-negative bacteria, respectively, by DUV LED of 280 nm wavelength was studied. Surface scenarios commonly encountered in environmental, clinical or food processing environments were used: nutrient rich surfaces, thin liquid films (TLF), and stainless steel surfaces (SS). DUV LED exposure achieved 5-log reduction for both strains within 10 min in most scenarios, except for TLF thicker than 0.6 mm. Inactivation kinetics in TLF and on dry SS followed the Weibull model (0.96 ≤ R² ≤ 0.99), but the model overestimated inactivation by small-dose DUV on wet SS. Confocal microscopy revealed in situ that bacteria formed a dense outer layer at the liquid-air interface of the liquid droplet, protecting the cells inside the droplet from the bactericidal DUV. This resulted in lower than anticipated inactivation on wet SS at small DUV doses, and deviation from the Weibull model. These findings can be used to design effective DUV LED disinfection strategies for various surface conditions and applications.

Bacterial spores present in milk can cause quality and shelf-life issues for dairy products. The objectives of this study were to evaluate the effectiveness of microfiltration (MF) in removing Bacillus licheniformis and Geobacillus sp. spores from skim milk using membranes with pore sizes of 1.4 and 1.2 µm, and to investigate the role of spore surface properties in MF removal. Cell sizes were determined by scanning electron microscopy, surface charge by zeta potential analysis, and surface hydrophobicity by contact angle measurements. Commercially pasteurized skim milk was inoculated with a spore suspension at about 106 cfu/mL, and then processed by MF using ceramic membranes at 6°C, a cross-flow velocity of 4.1 m/s, and transmembrane pressure of 69 to 74 kPa. Total aerobic plate and spore counts in the milk were determined before and after MF. All processing runs and surface and product analyses were conducted in triplicate, and data were analyzed statistically. For the same strain, spores were shorter and wider than vegetative cells, averaging 1.37 to 1.59 µm in length and 0.64 to 0.81 µm in width. Reduction of B. licheniformis spores significantly increased with a reduction in MF pore size, from 2.17 log for 1.4-µm pore size, to 4.57 log for 1.2-µm pore size. Both pore sizes resulted in almost complete removal of Geobacillus sp. spores. All spores and the ceramic membrane had a negative surface charge at milk pH, indicating an electrostatic repulsion between them. Bacillus licheniformis spores were hydrophilic, whereas Geobacillus sp. spores were hydrophobic. Consequently, Geobacillus sp. spores had a tendency to cluster in skim milk, preventing their passage even through the 1.4-µm MF membrane, whereas some B. licheniformis spores could still pass through a 1.2-µm membrane. This study demonstrates that efficient removal of spores from skim milk by cold MF may require a smaller membrane pore size than required for removal of vegetative cells of the same species, and that cell surface properties may interfere with the outcome of filtration as would be anticipated based on size alone.