Crackers are widely consumed snack foods and there is an increasing trend in adding functional ingredients to their composition. In the present work, the dried biomasses of four microalgae strains—Arthrospira platensis F&M-C256, Chlorella vulgaris Allma, Tetraselmis suecica F&M-M33, and Phaeodactylum tricornutum F&M-M40—were used as a source of proteins, antioxidants, and other bioactive molecules in artisanal wheat crackers. Two incorporation levels were tested: 2% (w/w) and 6% (w/w). The impact of microalgae addition was evaluated in terms of physical properties, biochemical composition, antioxidant activity, in vitro digestibility, and sensory characteristics. Microalgae crackers presented stable color and texture throughout eight weeks of storage. Microalgae crackers were slightly thinner and lighter than the control but presented a similar density in agreement with scanning electron microscope images, indicating that gas retention was not greatly affected by microalgae addition. Regarding biochemical composition, 6% A. platensis and C. vulgaris crackers presented a significantly higher protein content (13.2–13.5%), for which they could be claimed to be a “source of protein” according to the Regulation (EC) No. 1924/2006. A. platensis crackers showed the highest antioxidant activity and attained better sensory analysis scores. T. suecica and P. tricornutum crackers showed high phenolic content and antioxidant activity but attained low sensory scores mainly because of their unattractive fishy off-flavor.

Cyanobacteria can be considered a promising source for the development of new biostimulants as they are known to produce a variety of biologically active molecules that can positively affect plant growth, nutrient use efficiency, qualitative traits of the final product, and increase plant tolerance to abiotic stresses. Moreover, the cultivation of cyanobacteria in controlled and confined systems, along with their metabolic plasticity, provides the possibility to improve and standardize composition and effects on plants of derived biostimulant extracts or hydrolysates, which is one of the most critical aspects in the production of commercial biostimulants. Faced with these opportunities, research on biostimulant properties of cyanobacteria has undergone a significant growth in recent years. However, research in this field is still scarce, especially as regards the number of investigated cyanobacterial species. Future research should focus on reducing the costs of cyanobacterial biomass production and plant treatment and on identifying the molecules that mediate the biostimulant effects in order to optimize their content and stability in the final product. Furthermore, the extension of agronomic trials to a wider number of plant species, different application doses, and environmental conditions would allow the development of tailored microbial biostimulants, thus facilitating the diffusion of these products among farmers.

In this study, we compared the effects of a Tisochrysis lutea (T. lutea) F&M-M36 methanolic extract with those of fucoxanthin (FX) at equivalent concentration, on lipopolysaccharide (LPS)-stimulated RAW 264.7 macrophages. The T. lutea F&M-M36 methanolic extract contained 4.7 mg of FX and 6.22 mg of gallic acid equivalents of phenols per gram. HPLC analysis revealed the presence of simple phenolic acid derivatives. The T. lutea F&M-M36 extract exhibited a potent and concentration-dependent inhibitory activity against COX-2 dependent PGE2 production compared to FX alone. Compared to LPS, T. lutea F&M-M36 extract and FX reduced the expression of IL-6 and of Arg1 and enhanced that of IL-10 and of HO-1; T. lutea F&M-M36 extract also significantly abated the expression of NLRP3, enhanced mir-223 expression and reduced that of mir-146b, compared to LPS (p < 0.05). These findings indicate that T. lutea F&M-M36 methanolic extract has a peculiar anti-inflammatory activity against COX-2/PGE2 and NLRP3/mir-223 that might be attributable to the known anti-inflammatory effects of simple phenolic compounds found in the extract that may synergize with FX. Our data suggest that T. lutea F&M-M36 may serve as a source of anti-inflammatory compounds to be further evaluated in in vivo models of inflammation.

The EU Horizon2020 consortium PHOTOFUEL joined academic and industrial partners from biology, chemistry, engineering, engine design, and lifecycle assessment, making tremendous progress towards engine-ready fuels from CO₂ via engineered photosynthetic microbes. Technical, environmental, economic, and societal opportunities and challenges were explored to frame future technology realization at scale.

The environmental sustainability of the microalgae Nannochloropsis oceanica cultivation for total fatty acid (TFA) production was analyzed using life cycle assessment (LCA). Pilot data provided by the plant operator from cultivation in Italy using Green Wall Panel (GWP®) photobioreactors were upscaled to a 20-ha production process, and an LCA was conducted and assessed for the Italian regions of Tuscany and Sicily. Two additional scenarios were modelled to analyze the influence of more sustainable framework conditions, respectively nutrient recycling and renewable energy supply. The results show that environmental impacts per functional unit are around 15% less at the site with optimal growth conditions. Between 60 and 80% of the impacts are due to the energy demand during plant operation, infrastructure, and nutrient demand. Nutrient recycling and the gain of an energy credit from the separated biocrude with the hydrothermal liquefaction (HTL) process reduce the environmental impacts in all six International Reference Life Cycle Data System (ILCD) impact categories by an average of 11% compared to a scenario without nutrient recycling. The additional consideration of a renewable energy supply allows for an average reduction of 36% and together with the nutrient recycling of an average of 45% for the global warming potential (GWP) and most of the other impact categories.