Cellulose acetate (CA) is a semisynthetic, biodegradable polymer. Due to its characteristics, CA has several applications, including water membranes, filament-forming matrices, biomedical nanocomposites, household tools, and photographic films. This review deals with topics related to the CA membranes, which are prepared using different techniques, such as the phase inversion technique. CA membranes are considered very important since they can be used as microfiltration membranes (MF), ultrafiltration membranes (UF), nanofiltration membranes (NF), reverse osmosis (RO) membranes, and forward osmosis (FO) membranes. Membrane fouling results from the accumulation of materials that the membrane rejects on the surface or in the membrane’s pores, lowering the membrane’s flux and rejection rates. There are various forms of CA membrane fouling, for instance, organic, inorganic, particulate fouling, and biofouling. In this review, strategies used for CA membrane antifouling are discussed and summarized into four main techniques: feed solution pretreatment, cleaning of the membrane surface, membrane surface modification, which can be applied using either nanoparticles, polymer reactions, surface grafting, or surface topography, and surface coating.

In recent years, there has been a significant focus on the green synthetization of metal oxide nanoparticles due to their environmentally friendly features and cost-effectiveness. The aim of this study is to biosynthesize zinc oxide nanoparticles (ZnO NPs) through a green method, utilizing crude banana peel extract as reducing and capping agents, to characterize the synthesized ZnO NPs and test their antibacterial activity. ZnO NPs were biosynthesized using the peel extract of banana with various concentrations of zinc acetate dihydrate salt, followed by annealing at 400 °C for 2 h. The synthesized ZnO NPs were characterized using UV–visible spectroscopy (UV-Vis), scanning electron microscopy (SEM), dynamic light scattering (DLS), attenuated total reflectance–Fourier-transform infrared (ATR-FTIR), and X-ray diffraction (XRD). Also, its antibacterial efficiency against different bacterial strains was tested. ZnO NPs were biosynthesized successfully using the extract of Musa Acumniata (cavendish) fruit peel with a UV-Vis wavelength range of 344 to 369 nm and an electrical band gap ranging from 3.36 to 3.61 eV. The size varied from 27 ± 4 nm to 89 ± 22, and the negative zeta potential (ζ) ranged from −14.72 ± 0.77 to −7.43 ± 0.35 mV. ATR-FTIR analysis showed that the extract phytochemical functional groups were present on ZnO NPs. XRD results confirm the formation of a highly pure wurtzite hexagonal structure of ZnO NPs. Moreover, the best obtained size of ZnO NPs was selected for the antibacterial tests, giving the highest inhibition growth rate against Staphylococcus epidermidis (98.6 ± 0.9%), while the lowest rate was against Pseudomonas aeruginosa (88.4 ± 4.4%). The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) were reported and compared to previous studies. The unique properties of greenly synthesized ZnO NPs and their antibacterial activity have potential for reducing environmental pollution and the use of antibiotics, which may contribute to solving the problem of bacterial resistance. Therefore, studies that aim to design an applicable dosage form loaded with biosynthesized ZnO NPs might be conducted in the future.

Polyvinylidene fluoride (PVDF) membranes have become a favored choice for membrane filtration because of their outstanding mechanical characteristics, chemical resistance, thermal stability, and ease of handling. Nevertheless, the hydrophobic nature of PVDF membranes can result in fouling, which diminishes their efficiency over time. This study explores the impact of ZnO-Nanoclay on the properties and performance of mixed matrix membranes made from polyvinylidene fluoride (PVDF) at different loading percentages (0, 1, and 3 wt%). The ZnO-Nanoclay nanoparticles were synthesized using environmentally friendly methods, characterized, and blended into PVDF matrices via a solution-casting technique, resulting in a series of membranes. The synthesized nanoparticles were analyzed using Scanning Electron Microscopy (SEM) and X-ray diffraction (XRD). The resulting mixed-matrix membranes underwent comprehensive analyses to assess their structure and surface properties, employing SEM, XRD, Atomic Force Microscopy (AFM), and contact-angle measurements. Furthermore, tensile, antibacterial, and barrier properties were evaluated. Integrating ZnO-Nanoclay into PVDF membranes greatly improves antifouling properties, achieving inhibition rates of 99.92% at a clay-loading percentage of 3 wt% and increasing water-flux rates by 16% compared to pure PVDF membranes at 1 wt%. In addition, ZnO-Nanoclay nanoparticles significantly boost the mechanical properties of PVDF membranes, enhancing maximum strength by 500% at 3 wt% loading. This study examines the interplay between the structure, properties, and performance of mixed-matrix membranes by comparing different PVDF membranes that were mixed with different nanoclay composites, providing significant insights into improving these membranes through the incorporation of nanoclay composites to enhance their overall properties and effectiveness.

Polyethersulfone (PES) membranes are essential in separation processes; however, their inherent hydrophobicity can limit their effectiveness in water-intensive applications. This study aims to enhance PES membranes by modifying them with a NiFe₂O₄–nanoclay composite nanoparticle to improve both their hydrophilicity and photocatalytic potential as a photocatalytic membrane. The nanoparticles were synthesized using the sol–gel auto-combustion method and incorporated into PES membranes through mixed-matrix embedding (1 wt% and 3 wt%) and surface coating. X-ray diffraction confirmed the cubic spinel structure of the composite nanoparticles, which followed the second order kinetic reaction during the photodegradation–adsorption of crystal violet. The mixed-matrix membranes displayed a remarkable 170% increase in water flux and a 25% improvement in mechanical strength, accompanied by a slight decrease in contact angle at 1 wt% of nanoparticle loading. In contrast, the surface-coated membranes demonstrated a significant reduction in contact angle to 18°, indicating a highly hydrophilic surface and increased roughness. All membranes achieved high dye removal rates of 98–99%, but only the coated membrane system exhibited approximately 50% photocatalytic degradation, following mixed kinetics. These results highlight the critical importance of surface modification in advancing PES membranes, as it significantly reduces fouling and enhances water–material interaction qualities essential for future filtration and photocatalytic applications. Exploring hybrid strategies that combine both embedding and coating approaches may yield even greater synergies in membrane functionality.

Oily water treatment is a critical environmental challenge owing to the increasing demand for clean water and water pollution mitigation. Among the various treatment methods, membrane filtration stands out because of its numerous advantages, such as high separation efficiency, consistent water quality, versatility, and scalability. However, conventional treatment methods face notable limitations, such as non-uniform pore sizes, fouling problems, and severe environmental concerns owing to the use of toxic solvents in traditional phase inversion processes. Recent advancements in 3D printing technology offer promising solutions to address these drawbacks. This review investigates the potential of 3D-printed membranes as superior alternatives to conventional oil/water separation methods by comprehensively exploring their related aspects. This review begins by classifying 3D printing methods and examining their applications in 3D-printed water treatment membranes for oil/water separation. The key areas covered include membrane properties and characterization, membrane material selection, membrane fabrication and modification, and membrane design. This review also addresses the sustainability aspects of 3D-printed membranes for oil/water separation, highlighting the use of highly stable, renewable, and green materials, as well as the potential for material reuse and recycling. The challenges associated with the adoption of 3D printing for membrane production were addressed, focusing on material and process limitations, safety and environmental issues, and industrial scalability of the technology. Finally, this review outlines the prospects and future directions of research and innovation in 3D-printed membranes for oil/water separation, providing a comprehensive roadmap for advancing this emerging technology. Graphical Abstract