Gulf countries experience an imbalance between water supply and demand, which leads to a dramatic decline in the amount of groundwater. Solar energy for water desalination is an attractive option in this region, where the climate is sunny all year. A very basic solar device called a single basin solar still is commonly used to convert available seawater into drinkable water. The issue of producing drinking water may be resolved by using this technique, but because of its low productivity, it is rarely used. The experiments were carried out on a south-facing, single slope solar still with a 23-degree inclination of the condensing cover from October to November 2022, on different days for different water depths. According to the findings, the solar still with 4 cm of depth (as compared to 5, 6, and 7 cm) exhibited the maximum water productivity (2.680 L/day) with an efficiency of 30%. When the solar still was equipped with an external mirror, the temperature in the basin was raised, and water productivity increased to 3.075 L/day with an improved efficiency of 35%. Further, the effects of wind velocity, ambient temperature, inner glass temperature, and intensity of solar radiation on daily productivity have been studied.
Electrocoagulation (EC) was studied in this study as a potential alternative approach for treating Olive Mill Wastewater (OMW). Aluminum plates were utilized as anode and cathode to evaluate the removal of Chemical Oxygen Demand (COD) from OMW and the aluminum electrode’s weight loss. Central Composite Experimental Design (CCD) and Response Surface Methodology were used to optimize its performance. Anodes were weighed before and after each electrocoagulation experiment, to compare the experimental and the theoretical dissolved aluminum weights calculated using Faraday’s law. We discovered the following EC conditions for CCD: current density = 15 mA/cm2, pH = 4, and electrolysis time of 30 min. Under these conditions, the maximum COD removal ratio was 41%, equating to an Al weight loss of 288.89 g/m3 at an estimated operating cost of 1.60 USD/m3. According to the response optimizer, the most economical operating settings for COD removal efficiency of 58.888% are pH 4, a current density of 18.41 mA/cm2, electrolysis time of 36.82 min, and Al weight loss of 337.33 g/m3, with a projected running cost of 2.00 USD/m3.