This study demonstrates the successful 3D printing of dental resin-based composites (DRCs) containing ceramic particles using the digital light processing (DLP) technique. The mechanical properties and oral rinsing stability of the printed composites were evaluated. DRCs have been extensively studied for restorative and prosthetic dentistry due to their clinical performance and aesthetic quality. They are often subjected to periodic environmental stress, and thus can easily undergo undesirable premature failure. Here, we investigated the effects of two different high-strength and biocompatible ceramic additives, carbon nanotube (CNT) and yttria-stabilized zirconia (YSZ), on the mechanical properties and oral rinsing stabilities of DRCs. Dental resin matrices containing different wt.% of CNT or YSZ were printed using the DLP technique after analyzing the rheological behavior of slurries. Mechanical properties such as Rockwell hardness and flexural strength, as well as the oral rinsing stability of the 3D-printed composites, were systematically investigated. The results indicated that a DRC with 0.5 wt.% YSZ exhibits the highest hardness of 19.8 ± 0.6 HRB and a flexural strength flexural strength of 50.6 ± 6 MPa, as well as reasonable oral rinsing steadiness. This study provides a fundamental perspective for designing advanced dental materials containing biocompatible ceramic particles.
This review article highlights the potential of flash sintering as a novel densification technology for advanced ceramics. Conventional ceramic sintering methods involve heating a powder compact at high temperatures for several hours to trigger the solid-state diffusion of atoms. In contrast, flash sintering takes advantage of electric field and current to drastically lower processing time and temperature, providing a promising solution to reduce the economic, energetic, and environmental costs associated with traditional ceramic sintering methods. The effects of electric field and current during flash sintering result in unique non-equilibrium microstructures that enhance the mechanical properties of advanced ceramics through defect-mediated inelastic deformation mechanisms. This article provides an overview of the flash sintering mechanisms, the unique microstructural features observed in flash-sintered ceramics, and their impacts on mechanical properties.