It is a challenge to maintain a safe and efficient tracking for multiple high-speed trains under the moving block operational mode. In this paper, a novel cooperative tracking control based on a consensus algorithm and artificial potential field theory is proposed to realize the train tracking within a distance range. A tunable artificial potential function is first designed to dynamically adjust the distance between adjacent high-speed trains with real-time train states. By regulating the parameters of the artificial potential function, the safety distance can be adjusted according to the required tolerance deviation of the actual distance. Under the proposed strategy, each high-speed train operates with the desired speed and tracks the preceding one with an adjustable distance range. Numerical train operational cases are investigated to illustrate the effectiveness of the proposed methods.
This paper proposes a novel cooperative cruise control strategy to jointly optimize the energy consumption and ride comfort for multiple high‐speed trains. The cooperative control strategy is constructed by combining the consensus algorithm and potential function to achieve the synchronization of train speed and keep a safe tracking interval. A multi‐objective optimal function of multiple high‐speed trains is constituted of cruise following error, energy consumption and ride comfort. The non‐dominated quick sorting algorithm (NSGA‐II) is used to find the global Pareto‐optimal solutions to obtain the optimal cooperative control gains, which achieve the optimal trade‐offs between energy consumption and riding comfort for high‐speed trains. The asymptotic stability of the proposed control strategy is proved strictly. The simulation results verify that the proposed control strategy can effectively reduce energy consumption and improve the riding comfort simultaneously when compared with existing methods.
An urban railway train is a braking power-distributed system consisting of multiple carriages, which is becoming a powerful transportation tool to alleviate traffic congestion within cities as well as across cities. It is critical to control an urban railway train synchronously for improving braking performances, but challenging to be achieved due to strong coupling, unknown dynamics, and disturbances. This paper proposes an observer-driven distributed consensus braking control method for an urban railway train. Specifically, according to the data intersection among carriages, a distributed consensus braking controller is designed to make the velocity of each carriage converge to the desired braking curve. A sliding mode disturbance observer is then developed to estimate the non-linear coupling force and disturbances. The estimation value is utilized to compensate for the distributed consensus braking control law. Moreover, the potential fields are introduced to guarantee that the distances between any two neighbouring carriages are stabilized in a safe range. The effectiveness of the developed control strategy is firstly authenticated via the Lyapunov stability theory and then validated via numerical comparative simulations.
With continuous development in the scales of cities, the role of the metro in urban transportation is becoming more and more important. When running at a high speed, the safety of the train in the tunnel is significantly affected by any foreign objects. To address this problem, we propose a foreign object intrusion detection method based on WiFi technology, which uses radio frequency (RF) signals to sense environmental changes and is suitable for lightless tunnel environments. Firstly, based on extensive experiments, the abnormal phase offset between the RF chains of the WiFi network card and its offset law was observed. Based on this observation, a fast phase calibration method is proposed. This method only needs the azimuth information between the transmitter and the receiver to calibrate the the phase offset rapidly through the compensation of the channel state information (CSI) data. The time complexity of the algorithm is lower than the existing algorithm. Secondly, a method combining the MUSIC algorithm and static clutter suppression is proposed. This method utilizes the incoherence of the dynamic reflection signal to improve the efficiency of foreign object detection and localization in the tunnel with a strong multipath effect. Finally, experiments were conducted using Intel 5300 NIC in the indoor environment that was close to the tunnel environment. The performance of the detection probability and localization accuracy of the proposed method is tested.
A challenging rescue task for the underground disaster is to guide survivors in getting away from the dangerous area quickly. To address the issue, an escape guidance path developing method is proposed based on anisotropic underground wireless sensor networks under the condition of sparse anchor nodes. Firstly, a hybrid channel model was constructed to reflect the relationship between distance and receiving signal strength, which incorporates the underground complex communication characteristics, including the analytical ray wave guide model, the Shadowing effect, the tunnel size, and the penetration effect of obstacles. Secondly, a trustable anchor node selection algorithm with node movement detection is proposed, which solves the problem of high-precision node location in anisotropic networks with sparse anchor nodes after the disaster. Consequently, according to the node location and the obstacles, the optimal guidance path is developed by using the modified minimum spanning tree algorithm. Finally, the simulations in the 3D scene are conducted to verify the performance of the proposed method on the localization accuracy, guidance path effectiveness, and scalability.
With the aim of improving the energy utilization during the cooperative operation of multiple trains, this paper proposes an optimal distributed cooperative cruise control strategy to ensure safe and efficient tracking. A performance index function with distributed characteristics is constructed by considering the state errors among trains and energy consumption. An LQR-based optimal design technique is applied to cooperative cruise control to optimize the cooperative control gain to find the optimal solution. Additionally, the scalar coupling gains are introduced to decouple the design of the optimal cooperative control gain from the communication topology of trains. Thus, the proposed strategy is robust for arbitrary directed communication topologies and can eventually be used to achieve the distributed tracking optimization of multiple trains. The asymptotic stability of the system is proved strictly by exploiting the Hurwitz and Lyapunov stability theorem. A numerical simulation example is given to verify the feasibility and effectiveness of the proposed strategy.