Numerical simulations and experiments were utilized to study the removal of oxide scale formed on 300 M steel special-shaped hot forging surfaces during heating at elevated temperature by a high-pressure water descaling process. Specifically, the experimental setup of the special-shaped hot forging was designed and manufactured according to the descaling parameters and simulation results obtained from the hot rolling process. The force states of three typical hot forging surfaces impinged by high-pressure water jets were analyzed. Moreover, the mechanism of the high-pressure water descaling process was proposed based on the research results. The numerical simulations and experimental results revealed that the velocity distribution of the high-pressure water jets is relatively different in various areas of the special-shaped hot forging surfaces. Therefore, the descaling performance is synergistically influenced by the velocity of the high-pressure water jet and the shape of the special-shaped hot forging. Given a certain spray pressure, the value of impact force $F_i$ plays a significant role in the descaling of the typical hot forging. The larger the value of $F_i$ on the typical hot forging surface, the easier it is to remove the oxide scale, and vice versa. Accordingly, the difficulty of removing the oxide scale formed on the 300 M steel special-shaped hot forging surfaces during heating at elevated temperature by a high-pressure water descaling process is in the following order: plane surface < convex surface < concave surface. Additionally, only the inner-layer FeO of the oxide scale remained after the high-pressure water descaling process due to the appearance of FeO-Fe₂SiO₄ eutectic in the FeO layer.

Hot tensile tests of the GH3625 superalloy were carried out under the temperature range of 800–1050 °C and strain rates of 0.001, 0.01, 0.1, 1, and 10 s⁻¹ on a Gleeble-3500 metallurgical processes simulator. The effect of temperature and holding time on grain growth was investigated to determine the proper heating schedule of the GH3625 sheet in hot stamping. The flow behavior of the GH3625 superalloy sheet was analyzed in detail. The work hardening model (WHM) and the modified Arrhenius model, considering the deviation degree R (R-MAM), were constructed to predict the stress of flow curves. The results showed that WHM and R-MAM have good prediction accuracy by evaluating the correlation coefficient (R) and the average absolute relative error (AARE). Additionally, the plasticity of the GH3625 sheet at elevated temperature drops with the increasing temperature and decreasing strain rate. The best deformation condition of the GH3625 sheet in the hot stamping is in the range of 800~850 °C and 0.1~10 s⁻¹. Finally, a hot stamped part of the GH3625 superalloy was produced successfully, which had higher tensile strength and yield strength than the as-received sheet.

Ni-based superalloys are widely used in aerospace applications. However, traditional constitutive equations often lack the necessary accuracy to predict their high-temperature behavior. A novel constitutive model, utilizing Taylor series expansions and partial derivatives, is proposed to predict the high-temperature flow behavior of a nickel-based superalloy. Hot compression tests were conducted at various strain rates (0.01 s⁻¹, 0.1 s⁻¹, 1 s⁻¹, and 10 s⁻¹) and temperatures (850 °C to 1200 °C) to gather comprehensive experimental data. The performance of the new model was evaluated against classical models, specifically the Arrhenius and Hensel–Spittel (HS) models, using metrics such as the correlation coefficient (R), root mean square error (RMSE), sum of squared errors (SSE), and sum of absolute errors (SAE). The key findings reveal that the new model achieves superior prediction accuracy with an R value of 0.9948 and significantly lower RMSE (22.5), SSE (16,356), and SAE (5561 MPa) compared to the Arrhenius and HS models. Additionally, the stability of the first-order partial derivative of logarithmic stress with respect to temperature ($\partial \mathrm{l}\mathrm{n}\sigma /\partial T$) indicates that the logarithmic stress–temperature relationship can be approximated by a linear function with minimal curvature, which is effectively described by a second-degree polynomial. Furthermore, the relationship between logarithmic stress and logarithmic strain rate ($\partial \mathrm{l}\mathrm{n}\sigma /\partial \mathrm{l}\mathrm{n}\dot{\epsilon }$) is more precisely captured using a third-degree polynomial. The accuracy of the new model provides an analytical basis for finite element simulation software. This helps better control and optimize processes, thus improving manufacturing efficiency and product quality. This study enables the optimization of high-temperature forming processes for current superalloy products, especially in aerospace engineering and materials science. It also provides a reference for future research on constitutive models and high-temperature material behavior in various industrial applications.

TC31 is a new type of high-temperature titanium alloy, but few researchers have studied the combination of forming and heat treatment of a component using this material. The component with high ribs and thin webs was studied by numerical simulation and trail production. Based on the establishment of the finite element model, the forming process was analyzed by simulation software, and the maximum forming load of the component was 1920 kN. Ultimately, there were no folding defects of the component during the forming process. The material flow law was revealed by selecting the typical section of the component, and then the forming process was verified and the fully filled component was obtained. After that, the component was subjected to post-processing, and three heat treatment methods were designed to conduct heat treatment experiments on it (heat treatment: solution treatment and aging treatment). By analyzing the influence of three heat treatment methods on mechanical properties, the optimal heat treatment method was obtained, namely a solution treatment at 960 °C for 2.5 h and aging treatment at 610 °C for 7 h. The ultimate tensile strength, yield strength, elongation, and section shrinkage of the component through forging forming and heat treatment are higher than those of original material; meanwhile, it also indicates that the designed heat treatment has a better effect on the high-temperature mechanical properties of this titanium alloy at 650 °C than that at 450 °C. The research on the combination of the forming and heat treatment of this component provides a reference for the engineering application of high-temperature titanium alloys.

A novel manufacturing strategy for hot stamping die inserts is proposed in this study. A three-layer die consisting of a quenched and tempered 45 steel substrate, ANCO-X intermediate layer and Fe-based surface layer was fabricated via 3D grafting printing and wire arc additive manufacturing (WAAM). The microstructure, high-temperature mechanical properties and thermophysical parameters of the prepared specimens were experimentally investigated. ANCO-X and an Fe-based alloy were selected as the intermediate layer and surface layer of the die, respectively. Furthermore, the simulation results indicated that the temperature field of the novel die reaches dynamic thermal equilibrium after six stamping cycles; the maximum Mises equivalent stress of the novel die in critical regions was always less than the yield strength of the corresponding materials, which demonstrated that the dies manufactured by hybrid additive manufacturing could satisfy the service strength requirements. Finally, the novel die insert embedded with conformal cooling channels (CCCs) was successfully fabricated by integrating 3D grafting printing and WAAM, which verifies the feasibility of the proposed manufacturing route.