3D printing has been recognized as a disruptive technology for future advanced manufacturing systems. With a great potential to change everything from our daily lives to the global economy, significant advances in 3D printing technology have been made with respect to materials, printers, and processes. In this context, although similar to 3D printing technology, 4D printing technology adds the fourth dimension of time. 4D printing allows a printed structure to change its form or function with time in response to stimuli such as pressure, temperature, wind, water, and light. Recently, rapid advances in printing processes and materials development for 3D printing have allowed the printing of smart materials or multimaterials designed to change function or shape. In this review, we first compare the similarities and differences between 3D printing and 4D printing. We then look into the main factors composing 4D printing technology such as smart materials and designs. Finally, we summarize the current applications of 4D printing.
There are various fabrication methods for synthesizing nanostructures, among which plasma-based technology is strongly competitive in terms of its flexibility and friendly uses, economy, and safety. This review systematically discusses plasma techniques and the detailed interactions of charged particles, radicals, and electrons with substrate materials of, in particular, polymers for their nanostructuring. Applications employing a plasma-based nanostructuring process are explored to show the advantages and benefits that plasma treatment brings to many topical and traditional issues, and are specifically related to wettability, healthcare, or energy researches. A short perspective is also presented on strategic plans for overcoming the limitations in dimension from surface to bulk, lifetime of surface functions, and selectivity for interactions.
Functional glass surfaces with the properties of superhydrophobicity/or superhydrohydrophilicity, anti-condensation or low reflectance require nano- or micro-scale roughness, which is difficult to fabricate directly on glass surfaces. Here, we report a novel non-lithographic method for the fabrication of nanostructures on glass; this method introduces a sacrificial SiO2 layer for anisotropic plasma etching. The first step was to form nanopillars on SiO2 layer-coated glass by using preferential CF4 plasma etching. With continuous plasma etching, the SiO2 pillars become etch-resistant masks on the glass; thus, the glass regions covered by the SiO2 pillars are etched slowly and the regions with no SiO2 pillars are etched rapidly, resulting in nanopatterned glass. The glass surface that is etched with CF4 plasma becomes superhydrophilic because of its high surface energy, as well as its nano-scale roughness and high aspect ratio. Upon applying a subsequent hydrophobic coating to the nanostructured glass, a superhydrophobic surface was achieved. The light transmission of the glass was relatively unaffected by the nanostructures, whereas the reflectance was significantly reduced by the increase in nanopattern roughness on the glass.
Controlled surface wettability for oil has been intensively studied to remove industrial oil waste or oil spill pollution from seas or rivers. In particular, external stimuli-induced special wetting materials, such as photo-responsive TiO2, have attracted considerable attention for oil-water separation. In this study, a novel method is reported to fabricate a nano-sponge which is composed of hydrophobic hydrocarbon and hydrophilic TiO2 nanoparticles for oil absorption or desorption that are responsive to UV irradiation. The hydrocarbon in the nano-sponge could selectively absorb oil from water, whereas the absorbed oil is released into the water by TiO2 in response to UV irradiation. The nano-sponge functionalized porous polydimethylsiloxane released more than 98% of the absorbed crude oil with UV irradiation and air-bubbling. It could be continuously reused while maintaining a high absorption capacity and desorption efficiency without incurring secondary air or water pollution. This smart oil absorption/desorption methodology with excellent selectivity and recyclability with almost perfect removal of absorbed oil can be applied for oil-water separation, oil spill cleanup and reuse of spilled oil.
Porous carbon materials with high specific surface areas and superhydrophobicity have attracted much research interest due to their potential application in the areas of water filtration, water/oil separation, and oil-spill cleanup. Most reported superhydrophobic porous carbon materials are fabricated by complex processes involving the use of catalysts and high temperatures but with low throughput. Here, we present a facile single-step method for fabricating porous carbon nanoparticle (CNP) networks with selective absorbability for water and oils via the glow discharge of hydrocarbon plasma without a catalyst at room temperature. Porous CNP networks were grown by the continuous deposition of CNPs at a relatively high deposition pressure. By varying the fluorine content, the porous CNP networks exhibited tunable repellence against liquids with various degrees of surface tension. These porous CNP networks could be applied for the separation of not only water/oil mixtures but also mixtures of liquids with different surface tension levels.