Ultra-high-performance concrete (UHPC) is a kind of structural material with ultra-high strength, extremely low porosity, and excellent durability, which has extremely broad application prospects. In order to promote the application of UHPC constrained by carbon fiber-reinforced polymer (CFRP) sheets as strengthening material in practical engineering, a total of nine specimens were designed, and two kinds of UHPC strengthening layer thickness (35 mm and 45 mm, respectively) were designed. By changing the constraint form of the UHPC strengthening layer (longitudinal reinforcements and ordinary stirrups, longitudinal reinforcements and spiral stirrups, and CFRP sheets, respectively), the axial compression performance of the strengthened column was explored. The study shows that compared with the without strengthened column, the uplift of carrying capacity of the strengthened test column is 277–561%. The reinforcement form of the strengthening layer has little influence on the lifting capacity. Among the three different strengthening methods, the wrapped CFRP has the best improvement effect on carrying capacity and ductility, followed by longitudinal reinforcements and spiral stirrups in the strengthening layer. With the increase of CFRP layers from two to five layers, the maximum carrying capacity increases by 21.3%. The carrying capacity of three different types of UHPC-strengthened columns is theoretically calculated, and the accuracy of the theoretical calculation method is verified by comparing the test value with the theoretical value, which provides a theoretical basis for the application of UHPC-strengthened columns in the future.

By investigating the bond performance between glass-fiber-reinforced polymer (GFRP) bars and concrete, GFRP bars can be better applied to concrete structures as a building material. This paper considered the effects of three different GFRP bar surface treatments, three bonding lengths, corrosive solution, and immersion time on the bonding strength. The test results indicated that the bond strength decreases with the increase in the diameter and bond length. The bonding between GFRP bars and concrete can be improved by treating the surface of the bars in different ways. Compared with the control group, the bond strength of the specimens in the saline solution decreased by 1.3–21.4%, and the bond strength of the specimens in the alkaline solution decreased by 26.5–38.8%. In the corrosive environment, the bond properties are degraded. A bond strength calculation formula considering the surface treatment method of the GFRP bars was proposed. The prediction formula of the bond strength retention rate between the GFRP bar and concrete in the corrosive environment was established. The formula was validated with the available research data and the calculated values agreed well with the test values. The MBPE model and CMR model are modified to establish the bond-slip model of the GFRP bars and concrete in the corrosive environment. The model curve is close to the test curve. This paper provides a theoretical basis for future research on the bond-slip performance of GFRP bars and concrete.