In liquid composite moulding processes, the curing behaviour of thermoset matrices plays a decisive role in determining manufacturing quality and cycle time. Premature demoulding may lead to insufficiently cured components, whereas excessively long curing times reduce production efficiency. Reliable monitoring and modelling of the curing process are therefore essential for process optimisation. In this study, the cure kinetics of a fast-curing epoxy resin system are modelled using the Grindling kinetic model, which accounts for diffusion-controlled reaction behaviour and vitrification effects. Model parameters are identified using both dynamic and isothermal differential scanning calorimetry (DSC) measurements. In addition, the glass transition temperature is described as a function of the degree of cure using the DiBenedetto relationship. To demonstrate the applicability of the model for process monitoring, an experimental mould equipped with temperature sensors was developed to simulate real-time estimation of the degree of cure during isothermal processing. The predicted degree of cure is validated by post-process DSC analysis of the manufactured samples. Initial comparisons reveal systematic deviations caused by temperature measurement uncertainties. After implementing a temperature correction based on experimentally determined sensor deviations, the predicted degree of cure shows significantly improved agreement with DSC measurements. The results demonstrate that combining kinetic modelling with temperature monitoring enables reliable real-time estimation of the curing state for fast-curing epoxy systems. The study also highlights the critical importance of accurate temperature measurement for curing monitoring and provides insights into the practical implementation of sensor-based monitoring strategies in liquid composite moulding processes.

Hybride Faserverbund-Metall-Bauteile eignen sich für Anwendungen als Antriebswellen, Achsen oder Zug-Druck-Stangen und besitzen aufgrund ihres hohen Leichtbaugrades ein enormes Potenzial in den unterschiedlichsten Branchen. In diesem Beitrag werden das Rotational-Moulding-Verfahren sowie aktuelle Erkenntnisse zu den mechanischen Eigenschaften dieser Hybridverbindung vorgestellt. Dies ermöglicht eine schnelle und kostengünstige Herstellung derartiger Bauteile.