This study investigated the tensile properties and fatigue behavior of FH36 steel plates subjected to alternating rolling processes in different directions, as well as their performance at room temperature and −60 °C. The results revealed that by employing sequential rolling in both the rolling and transverse directions, the disparities in the mechanical properties between these two directions were eliminated, resulting in nearly identical tensile performances. The macroscopic features of the high-cycle and low-cycle fatigue fractures at both room temperature and at −60 °C were similar, with high-cycle fatigue fractures exhibiting oblique shear features and low-cycle fatigue fractures exhibiting cup-cone shapes. The crack initiation zones were consistently located on the surface of the specimens. As the maximum stress increased, the area of the high-cycle fatigue crack propagation zone decreased, while the area of the final fracture zone, the number of dimples, and the proportion of low-angle grain boundaries all increased. Under −60 °C conditions, the critical crack length for high-cycle fatigue, the maximum stress limit for the onset of high-cycle fatigue, and the fatigue limit were all higher than those at room temperature, indicating a superior low-temperature fatigue performance.

This study investigated the mechanical properties and fatigue behavior of FH36 steel plate rolled in different directions. By adopting a sequential rolling process in the rolling direction (RD) and transverse direction (TD), the differences in properties between RD and TD were eliminated, resulting in nearly identical tensile properties. The steel plate exhibited a yield strength of approximately 420 MPa, a tensile strength of approximately 506 MPa, and an elongation of approximately 25%. Fatigue tests conducted at room temperature and -60℃ showed a fatigue limit of the maximum stress of 488 MPa at room temperature and 500 MPa at -60℃, indicating improved low-temperature fatigue performance. The fracture surfaces displayed distinct characteristics, such as oblique shearing fractures for high-cycle fatigue and cup-cone shape fractures for low-cycle fatigue. The fatigue source zone were both on the surface of the specimens. As the maximum stress increased, the area of the crack propagation zone for high-cycle fatigue decreased, while the area of the final fracture zone, the number of dimples and the proportion of the LAGBs increased.

This study used simulation software and experiments to analyze the microstructure and texture of FH36 ship plate steel at different thicknesses and temperatures. The austenite phase transformed into ferrite phase at 830 °C and MC and M₇C₃ phases precipitated at 1150 °C and 543 °C, respectively. At room temperature, the microstructure at the surface and 1/4 thickness consisted of polygonal ferrite, acicular ferrite and granular bainite, while the 1/2 thickness had less acicular ferrite and granular bainite. The texture components were mainly {111} and {111} at all thicknesses, but {001} was stronger at 1/2 thickness. The grain size decreased gradually from 1/2 thickness to the surface, and the proportion of high-angle grain boundaries was significantly lower at the surface than at 1/4 and 1/2 thickness.