Chowdhury Sakib-Uz-Zaman

Mr. Chowdhury Sakib-Uz-Zaman


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 April 2023 in Metals
Verified
Journal Article
Open access
PDF file
CSChowdhury Sakib-Uz-Zaman
Chowdhury Sakib-Uz-Zaman
Mohammad Abu Hasan KhondokerMohammad Abu Hasan Khondoker
Mohammad Abu Hasan Khondoker
Copper, due to its high thermal and electrical conductivity, is used extensively in many industries such as electronics, aerospace, etc. In the literature, researchers have utilized different additive manufacturing (AM) techniques to fabricate parts with pure copper; however, each technique comes with unique pros and cons. Among others, material extrusion (MEX) is a noteworthy AM technique that offers huge potential to modify the system to be able to print copper parts without a size restriction. For that purpose, copper is mixed with a binder system, which is heated in a melt chamber and then extruded out of a nozzle to deposit the material on a bed. The printed part, known as the green part, then goes through the de-binding and sintering processes to remove all the binding materials and densify the metal parts, respectively. The properties of the final sintered part depend on the processing and post-processing parameters. In this work, nine published articles are identified that focus on the 3D printing of pure copper parts using the MEX AM technique. Depending on the type of feedstock and the feeding mechanism, the MEX AM techniques for pure copper can be broadly categorized into three types: pellet-fed screw-based printing, filament-fed printing, and direct-ink write-based printing. The basic principles of these printing methods, corresponding process parameters, and the required materials and feedstock are discussed in this paper. Later, the physical, electrical, and mechanical properties of the final parts printed from these methods are discussed. Finally, some prospects and challenges related to the shrinkage of the printed copper part during post-processing are also outlined.

17 March 2023 in Polymers
Verified
Journal Article
Open access
PDF file
CSChowdhury Sakib-Uz-Zaman
Chowdhury Sakib-Uz-Zaman
Mohammad Abu Hasan KhondokerMohammad Abu Hasan Khondoker
Mohammad Abu Hasan Khondoker
The conventional manufacturing methods for fabricating orthotic and prosthetic (O&P) devices have been in practice for a very long time. Recently, O&P service providers have started exploring different advanced manufacturing techniques. The objective of this paper is to perform a mini review on recent progress in the use of polymer-based additive manufacturing (AM) for O&P devices and to gather insights from the O&P professionals on the current practices and technologies and on the prospect of using AM techniques in this field. In our study, first, scientific articles on AM for O&P devices were studied. Then, twenty-two (22) interviews were conducted with O&P professionals from Canada. The primary focus was on five key areas: cost, material, design and fabrication efficiency, structural strength, functionality, and patient satisfaction. The cost of manufacturing the O&P devices using AM techniques is lower as compared to the conventional methods. O&P professionals expressed their concern over the materials and structural strength of the 3D-printed prosthetic devices. Published articles report comparable functionality and patient satisfaction for both O&P devices. AM also greatly improves design and fabrication efficiency. However, due to a lack of qualification standards for 3D printed O&P devices, 3D printing is being embraced more slowly in the O&P business than in other industries.

15 November 2023 in Materials
Verified
Journal Article
Open access
PDF file
MHMohammad Javad Hooshmand
Mohammad Javad Hooshmand
CSChowdhury Sakib-Uz-Zaman
Chowdhury Sakib-Uz-Zaman
Mohammad Abu Hasan KhondokerMohammad Abu Hasan Khondoker
Mohammad Abu Hasan Khondoker
Polymer foams are extensively utilized because of their superior mechanical and energy-absorbing capabilities; however, foam materials of consistent geometry are difficult to produce because of their random microstructure and stochastic nature. Alternatively, lattice structures provide greater design freedom to achieve desired material properties by replicating mesoscale unit cells. Such complex lattice structures can only be manufactured effectively by additive manufacturing or 3D printing. The mechanical properties of lattice parts are greatly influenced by the lattice parameters that define the lattice geometries. To study the effect of lattice parameters on the mechanical stiffness of lattice parts, 360 lattice parts were designed by varying five lattice parameters, namely, lattice type, cell length along the X, Y, and Z axes, and cell wall thickness. Computational analyses were performed by applying the same loading condition on these lattice parts and recording corresponding strain deformations. To effectively capture the correlation between these lattice parameters and parts’ stiffness, five machine learning (ML) algorithms were compared. These are Linear Regression (LR), Polynomial Regression (PR), Decision Tree (DT), Random Forest (RF), and Artificial Neural Network (ANN). Using evaluation metrics such as mean squared error (MSE), root mean squared error (RMSE), and mean absolute error (MAE), all ML algorithms exhibited significantly low prediction errors during the training and testing phases; however, the Taylor diagram demonstrated that ANN surpassed other algorithms, with a correlation coefficient of 0.93. That finding was further supported by the relative error box plot and by comparing actual vs. predicted values plots. This study revealed the accurate prediction of the mechanical stiffness of lattice parts for the desired set of lattice parameters.

22 October 2024 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
CSChowdhury Sakib-Uz-Zaman
Chowdhury Sakib-Uz-Zaman
AKAinul Kabir
Ainul Kabir
Golam KabirGolam Kabir
Golam Kabir
Bridges, like any other infrastructure, deteriorate over time, and the more they degrade, the more expensive it becomes to perform maintenance activities on them. Therefore, it is important to predict their deterioration and plan intervention programs from economic and functionality points of view. While deterministic models are used to predict the deterioration of a structure, they do not consider any maintenance activities carried out beforehand. In this paper, we adjusted the deterioration model to overcome those limitations and planned an intervention program for the bridges of Ontario for 2023–2025. To achieve this, we cleaned the dataset; formulated the models; ran simulations with multiple deterministic and stochastic models to find the best one; adjusted the model equation to account for various levels of previous maintenance works; formulated the intervention action requirement for the next three years by developing an algorithm to reflect previous maintenance trends and their effects on the condition ratings; prepared an equalized work requirement for each year; and prioritized the action requirements based on a proposed risk matrix. Finally, an exhaustive plan with an action requirement for all the bridges was prepared for 2023–2025. The proposed plan will help decision makers to take proper action to maintain the serviceability of the bridges.

29 October 2024 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
CSChowdhury Sakib-Uz-Zaman
Chowdhury Sakib-Uz-Zaman
Mohammad Abu Hasan KhondokerMohammad Abu Hasan Khondoker
Mohammad Abu Hasan Khondoker
Stereolithography (SLA) is a 3D printing technology that uses a laser to cure liquid resin from a tank, layer by layer, to create highly detailed and precise objects. However, this 3D printing technique requires a large amount of resin material to be placed in the bath that is exposed to UV each time a layer is printed. On the other hand, extrusion 3D printing offers the printing of a part by dispensing only the desired amount of material on demand. However, extrusion 3D printing does not result in the intricate high-resolution features that can be achieved in SLA. To be able to 3D-print high-resolution parts without needing a large resin bath, a dispensing system was designed that would deposit only the required amount of resin on demand while high-resolution capability is achieved by curing the deposited resin using a UV laser. To ensure the isotropic properties of the printed parts, fluid flow simulations of the polymer resin through the designed dispensing system were performed. Therefore, the primary objectives were twofold: (1) designing a resin dispensing system including a specialized nozzle to promote laminar flow and (2) conducting fluent simulations to analyze the nozzle’s performance. The fluent simulations provided valuable insights into the fluid dynamics, affirming the nozzle’s efficiency in ensuring a consistent and controlled laminar flow of the resin during the dispensing process.

28 October 2024 in Engineering Proceedings
Verified
Conference Paper
Open access
PDF file
CSChowdhury Sakib-Uz-Zaman
Chowdhury Sakib-Uz-Zaman
Mohammad Abu Hasan KhondokerMohammad Abu Hasan Khondoker
Mohammad Abu Hasan Khondoker
Microcontact printing (µCP) has become an emerging method for creating exact patterns on a range of substrates. This short review paper seeks to give a brief summary of the developments, fabrication techniques, applications, and difficulties in the microcontact printing of polymeric devices. In this systematic review, 20 papers from various fields were chosen for study. This review begins by introducing the basics of microcontact printing and discussing its capacity to transfer predetermined patterns with submicron resolution from an elastomeric stamp to substrates. Then, various microcontact printing production techniques for polymeric devices are reviewed. Furthermore, this review explores the broad range of applications enabled by microcontact printing, including electronics, biotechnology, nanotechnology, and surface engineering. Additionally, the potential difficulties and challenges associated with using microcontact printing processes are discussed. This literature review is to give researchers and practitioners a thorough understanding of microcontact printing by integrating the results from a few chosen studies. It promotes additional study and innovation in this promising sector by highlighting the most recent advancements, manufacturing techniques, and difficulties related to the manufacture of polymeric devices.